Brown patch treatment home depot
* Vs. leading competitor based on Ready-To-Spray product label comparisons.
Need a solution? See what’s available at:
How To Apply
Can I use Fungus Control For Lawns Granules around ornamental plantings?
Per the product label, Fungus Control For Lawns Granules should only be applied to lawns. The diseases listed on the label are common lawn infections. Although we would not expect any adverse effects to ornamental plantings, we cannot guarantee effective control of the target disease. Therefore, we must advise you strictly adhere to instructions found on the product label.
My spreader is not listed on the Fungus Control For Lawns Granules label.
Unfortunately, we cannot capture settings for every current or past spreader ever made. The most important thing is to apply the proper amount of product over your measured target area. If your spreader is not on our label, we recommend that you measure the recommended amount of product into your spreader, select a low setting, and apply evenly over the measured area until the spreader is empty. You may need to go over the area more than once; however, using a low setting will ensure that you won’t run out of product before you’ve covered the area.
Should I water the lawn after I apply Fungus Control For Lawns Granules?
Watering after application carries Fungus Control For Lawns Granules into the root zone. It enters the grass through its roots and blades. Rain or water cannot wash off this internal protection!
What lawn diseases will Fungus Control for Lawns Ready-To-Spray cure or prevent?
This product will control lawn diseases including Anthracnose, Bermudagrass decline, Brown Patch, Dollar Spot, Fusarium Blight, Gray Leafspot, Powdery Mildew, Red Thread, Rhizoctonia Blight, Rust, Smut and Summer Patch.
How much Fungus Control for Lawns Ready-To-Spray should be applied for best results?
First determine the area to be treated.
Apply entire 32 fl. oz. bottle to 5,000 sq. ft. It should take about five to six minutes to empty the container over the treatment area.
For Bermudagrass decline, Fusarium Blight and Summer Patch, apply entire 32 fl. oz. bottle to 2,500 sq. ft.
This product is highly effective when used to prevent disease or when applied at first sign of disease. To prevent damage, start treating when conditions are favorable for disease development in your area, and treat every 30 days.
To control existing disease, reapply every 14 days until lawn shows signs of recovery. Do not apply more than 16 times per year at a rate of 32 fl. oz. per 5,000 sq. ft. or eight times per year at a rate of 32 fl. oz. per 2,500 sq. ft.
How does Fungus Control for Lawns Ready-To-Spray work?
This product provides three-way action: It kills existing fungi, forms a protective barrier on the outside of the plant and is absorbed into the plant to keep on protecting regardless of weather conditions.Need a fungus control for lawns? Our lawn fungus control prevents and cures Red Thread, Brown Patch, Dollar Spot, Rust and other listed fungus diseases. ]]>