Can Weed Grow From One Seed

Everything you ever wanted to know about growing your first weed plant, but were too afraid to ask. Here's a step-by-step guide. Coloradans can grow marijuana in their homes for personal use. Up to six plants are allowed per Colorado resident over age 21, with as many as three plants flowering at one time. Ten Frequently Asked Questions About Growing Cannabis Cannabis sativa is the scientific name of the plant that includes both hemp and marijuana. It is one of the oldest cultivated plants in

How to Grow Your First Weed Plant

“Growing cannabis in tight spaces is not my usual recommendation,” said Stephen Lipton, the cultivation manager at The Farm Recreational Marijuana Dispensary, an award-winning recreational facility in Boulder, Colorado, specializing in what it calls “craft cannabis.” At any given time, Lipton oversees close to 15,000 plants across seven different facilities in Boulder County. “If you have a really tight space and it gets too hot or too humid, you’re going to have big trouble.”

Despite the hurdles, many first-time growers still choose to cultivate cannabis indoors (which is legal in Alaska, Colorado, Washington D.C. and Oregon), and there are steps to maximize a plant’s chances of succeeding. It all starts with a plant’s genetics. “For your typical closet setup, you’re going to want a plant that stays short,” Lipton said. “A lot of time that means an indica. Sativas are really tall and lanky.” (More on the difference between those two families here.)

While most, if not all, medical and recreational farms cultivate cannabis from seeds, guaranteeing that their plants are free from viruses, most home growers, even those with experience, typically begin with clones — essentially trimmed pieces of female cannabis plants that have been rooted in separate pots. “When most people think of cannabis — you know, what you smoke — they’re thinking about the flowers of female plants,” Lipton said. “When you grow from seeds, half of them will be males. If you’re only going to do one or two plants, you don’t want to waste your time with that stuff.” A clone sourced from a dispensary or a knowledgeable friend guarantees that the plant is female and will eventually produce bud pending proper care. “You can get up to four ounces off the right plant — if you know what you’re doing.”

Even with a healthy clone, however, cultivating cannabis can be a long and arduous process — especially in tight indoor spaces. “A lot of people think growing is easy, but it’s not,” Lipton said. “You have to be really on it. Not everyone has success, obviously.”

For some people, cannabis cultivation is a hobby. Others a life-long passion. But it’s unique in its vast demographic appeal. “Everyone I know grows,” Lipton said. “There are people in their 20s doing it. I know people in their 60s. It’s a fun thing for people. You don’t have to be afraid anymore.” Here are Lipton’s tips on growing your first plant.

Know the law.

It’s important to remember that cultivating even one cannabis plant for personal consumption is felony on the federal level and punishable by up to five years in prison. Meanwhile, four US states — Alaska, Colorado, Washington D.C. and Oregon — have passed local amendments, allowing citizens who are 21 years old and over to grow a limited number of plants without fear of persecution.

Even in our most progressive states, however, the law is far from simple. “In Colorado, it’s now county-specific,” Lipton said. “When the amendment first passed, they said you could grow six plants per person. But now, certain counties and municipalities have come out and said it’s just six per house — there’s no combining plant counts. That means you can have three vegetating and three flowering at any given time.”

Another layer to consider is that cannabis cultivation must happen “out of plain sight.” “You can’t have any odor. If it’s offending people in the neighborhood, then it’s an issue.”

Foster the right growing environment.

Before someone even begins to consider the genetics of their preferred strain, they should first ensure that their apartment is cannabis-friendly. There are five main factors to consider: space, temperature, humidity, the pH of water, and the amount of light.

Space: 3 x 3 x 5 feet, minimum. “The bigger the space, the better. With all the lights, closets get hot,” Lipton said. That said, closets help growers control light pollution when the plant is in its flowering cycle — one of the main reasons home growers favor them over larger spaces, such as living rooms. “If you have a spare bedroom, or a basement even, you can just use that and close the door,” Lipton said.

Temperature: 68 to 78 degrees Fahrenheit. “A tool you should always have is a little temperature gauge,” Lipton said. “They call them hygrometers. They’re cheap and tell you both the temperature and the humidity.”

Relative humidity: 30 to 45 percent. “If you live somewhere humid, you’re probably going to want to buy a dehumidifier,” said Lipton. “In Boulder, we sometimes have to add humidity.” At home, that can be done with a reliable humidifier.

pH of Water: 6.3 to 6.7. “You’ll need a meter that you can stick into your water and tell you the pH,” Lipton said. “You want something between 6.3 to 6.7 pH for watering your plants. That sounds like pretty sophisticated stuff but it’s really not. A lot of times your tap water will be 7.8. You can use what they call pH down. That’s a crucial step.”

Light: 2,200k. “For a closet set up, I would recommend a 175-watt HPS light,” Lipton said. “Some people try to use fluorescent lighting, but I wouldn’t recommend that. You’re just not going to get a very good outcome. Nowadays, HPS lights can just go right into your home outlet, and you’d just need a timer [to set the intervals]. Position the light directly overhead. They can be pretty powerful, so you’re going to want it at least two feet from the top of the canopy [to prevent the plant from overheating].”

Find a healthy clone.

Both medical and recreational dispensaries now sell female cannabis clones, which retail for about $15. Alternatively, it’s commonplace for home growers to gift clones to their friends. “When you get a clone, someone will likely give it to you in a four-inch pot. You’re skipping that whole step of having to germinate seeds. You’re already 10, 14 days ahead of the game and basically ready to plant.”

Plant and maintain the vegetative cycle until the plant is mature.

Cannabis plants yield the highest-quality (and quantity) flowers after maturing. This usually takes about a month to happen. “I recommend planting in a five-gallon Home Depot bucket,” Lipton said. “It’s really important to have proper drainage, so you want to drill some holes in the bottom. The biggest mistake people make is that they overwater and suffocate the roots. Cannabis likes to be watered and dried out before it’s watered again.” During the vegetative cycle, the plant should be exposed to a minimum of 18 hours of light. Remember to open the closet door while the lights are on to prevent the space from heading north of 78 degrees Fahrenheit.

Trigger the flowering cycle.

To understand the flowering cycle, it’s important to remember that cannabis is a plant. And, like most plants, it follows the seasons. To trigger flowering — which will take 55 to 60 days to complete — growers reduce the time plants spend exposed to the light source from 18 hours to 12. “You’re basically telling your plant it’s mid-September,” Lipton said.

See also  What To Do With Leftover Weed Seeds

Sticking to that schedule is key, he added. “Say you’re at day 30 of the flowering cycle and you come into that closet when it’s supposed to be dark and turn a bunch of lights on. You’re going to throw the whole cycle off and that’s the end of that. It only takes 10 seconds.”

Though the 12-hour interval is fairly universal, knowing exactly when to induce flowering is less clear. For the home grower, it usually comes down to space; the longer one waits to trigger the flowering cycle, the taller their plant will be. A good rule of thumb: cannabis will only continue to grow 30 to 50 percent once the light source is reduced. If the plant is growing in a closet, growers should trigger the flowering cycle, understanding that there must be more than two feet of space between the canopy of the plant throughout the entirety of its life.

Harvest and cure.

After 55 to 60 days, growers begin paying close attention to their plants’ trichomes — the small, bulbous fibers that develop around the flower of the female plant. “Those trichomes will turn from clear to amber,” Lipton said. “They kind of look like red hairs. You know it’s time to harvest when about 10 to 15 percent of the trichomes turn that color.” On average, cannabis plants have a five- to seven-day window of peak harvest time.

To harvest, many growers begin by removing the leaves of the cannabis plant with trim scissors, followed by the buds (using pruners). “We call this bucking,” Lipton said. “Gloves are also extremely important for sanitation reasons as well as to keep your hands from becoming sticky with the resin from the plant.”

The last step involves curing the bud. “Curing is just as important as the growing process,” Lipton added. “We do a slow cure, which means that it takes anywhere from three to six weeks depending on variety.” Temperature and humidity play a large role during cure and must be maintained to ensure a great final product. “Our actual cure process is somewhat of a secret, so I cannot share the fine details,” Lipton said. “But it’s an art form and extremely crucial to our success.” The reason growers cure bud after harvesting is that it creates a smoother smoke and increases its potency. Detailed recommendations for proper curing can be found online, here and here.

Cigar City Florida Man DIPA

Presented by Florida Man DIPA

Florida Man is a modern Double IPA with a tropical expression from its blend of American hops, including Citra, Azacca, El Dorado and Mandarina Bavarian. The hops are balanced by delicate peach esters from a unique Double IPA yeast and a dash of Canadian honey malt.

Gear Patrol A daily magazine of immersive stories, deals, buying advice, product-forward editorial, and reports from far-flung places.

This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses. You may be able to find more information about this and similar content at piano.io

Home grow laws

Coloradans can grow marijuana in their homes for personal use.

Up to six plants are allowed per Colorado resident over age 21, with as many as three plants flowering at one time.

Don’t forget that counties and municipalities can pass stricter laws. For example, Denver limits a home grow to 12 plants, even if there are three or more adults over age 21 in the residence. Be sure to check your local laws for specific details.

The laws are different for medical marijuana consumers.

Marijuana plants must be kept in an enclosed, locked area that can’t be viewed openly. This means the plants can’t be outside.

At homes with residents under 21, any marijuana grow area must be enclosed and locked in a separate space that minors can’t access.

At homes without residents under 21, extra precautions must be taken to make sure any visiting youth don’t have access to marijuana plants.

Ten Frequently Asked Questions About Growing Cannabis

Cannabis sativa is the scientific name of the plant that includes both hemp and marijuana. It is one of the oldest cultivated plants in human history and has been grown for seed, fiber, oil, and medicine. There are generally three recognized subspecies (C. sativa subsp. sativa, C. sativa subsp. indica, and C. sativa subsp. ruderalis) and hundreds of varieties within Cannabis, each with unique characteristics.

1. What is the difference between cannabis, hemp, and marijuana?

Hemp and marijuana are closely related types of Cannabis that are often referred to as high and low THC cannabis. The difference between them is similar to the difference between sweet corn and field corn. Both are Zea mays, but sweet corn makes high-sugar kernels, and field corn makes starch-filled kernels. Sweet corn and field corn differ by only a few genes. Similarly, hemp and marijuana differ by only a few genes.

Cannabis varieties of both hemp and marijuana differ in outward appearance and in the production of over a hundred compounds in the class called cannabinoids. The two most common cannabinoids are delta-9-tetrahydrocannabinol (THC), the psychoactive compound responsible for the “high” often associated with Cannabis, and cannabidiol (CBD), a non-psychoactive sibling of THC with a unique set of characteristics and reported medical benefits (Nahler, 2019). These cannabinoids are the major difference between marijuana and hemp.

High THC Cannabis: Marijuana

Marijuana is the common name for Cannabis varieties that have been bred to have high THC levels, often containing 15–30% THC by weight. Marijuana is grown exclusively for the unpollinated female flower, where THC concentration is highest. Marijuana is classified as a Schedule 1 controlled substance by the federal government, but some states have legalized it for medical and recreational use. Where marijuana is legal, growers benefit from a remarkably high value for their crop. Recent marijuana prices range from about $750 to $1,750 per pound, depending on the quality and method of production (U.S. Cannabis Spot Index, 2018).

Figure 1. The anatomy of Cannabis sativa,
including both male and female reproductive
structures. Typically, these structures occur
on separate plants, but they can occasionally
occur on the same plant (hermaphroditic).
CBD is produced in trichomes, tiny
structures that occur in the highest density
on unpollinated female flowers. Image
used with permission from Leafly.

Low THC Cannabis: Hemp

Hemp is the common name for Cannabis varieties that have been genetically selected to have a THC content less than 0.3%. Since this THC level is low, hemp does not provide the psychoactive effect that marijuana does. Instead, hemp is grown primarily for CBD and other cannabinoids, and to a lesser extent, for its durable fiber and nutritious seed. The value of the crop varies depending on the intended use and the supply. Prior to the 2018 hemp market boom, gross returns were about $12,500, $1,300, and $750 per acre for CBD, fiber, and seed, respectively (Schluttenhofer & Yuan, 2017). Prices for CBD increased in 2018 to about $4.00 per percentage CBD per pound but then crashed to about $0.75 in 2019 to the present (personal communication with Utah hemp processors). Still, many in the industry predict that prices will stabilize in 2021. Due to this volatility, it is difficult to report current average prices. Prices vary greatly according to the intended end use, region, and specific contracts with buyers. Furthermore, state and national hemp prices are not tracked like other commodities, so it is difficult to find published reports of prices over time.

See also  Smart Weed Seed

2. Why does plant gender matter?

Hemp differs from many other crops because it is primarily dioecious, meaning it has separate male and female plants. In addition, hermaphroditic plants with both male and female reproductive structures do occur. This creates unique issues for growers hoping to produce a high CBD crop because CBD is most concentrated on unpollinated female flowers (Figure 1). Pollination significantly reduces crop value, so an all-female field is important when hemp is grown for CBD. The pollination of hemp plants can reduce the essential oil yield from 2 to 0.9 gallons/acre, a 56% decrease (Meiner & Mediavilla, 1998). Male plants produce pollen that fertilize female plants, which causes seed production, lower flower counts, and decimates CBD levels (DeDecker, 2019). The distance that hemp pollen can travel is unknown, but due to cross-pollination risks, fields should be at least 3 miles apart (Small & Antle, 2003). However, some recommendations suggest up to a 15-mile isolation distance to be safe (DeDecker, 2019).

3. How and when can I detect plant gender?

Both male and female plants can be identified at the pre-flowering stage. Female flowers have two white fuzzy hair-like structures protruding from them, differentiating them from males early on. Male flowers are round, lack the white hairs, and generally occur in dense clusters (Figure 2). Cannabis is a short-day plant (requires longer periods of darkness than daylight to flower), so they will start to flower when day and night lengths are approximately equal. Male plants will produce pollen for a span of two to four weeks (DeDecker, 2019). If a male is identified in a hemp field grown for CBD, it should be removed and buried, burned, or carefully stored to prevent pollination of the females.

Figure 2. Sexually mature female plants produce “pre-flowers” (left). The white hair-like structures can distinguish females from males, which produce dense oval-shaped clusters (right). Photos by Mitchell Westmoreland.

4. Should I purchase seed or clones?

There are two ways to produce a cohort of all females in hemp: clonal propagation and feminized seed. Clonal propagation involves taking a cutting from a mother plant and allowing it to establish roots. This method results in genetically identical, all-female plants with excellent vigor and predictable traits.

Feminized seeds are produced by treating female plants with chemicals such as silver thiosulfate, which can cause a female plant to develop male flowers that produce genetically female pollen (Lubell & Brand, 2018). The female pollen is used to pollinate a female flower, resulting in seeds that can be over 99% female. Feminized seeds are less expensive than clones but result in genetically different plants. They have a greater chance of producing male and hermaphroditic plants. Hemp grown from feminized seed requires careful and repeated scouting to remove male plants, increasing the total cost of production. This scouting should begin at the pre-flower stage when males can be distinguished (Figure 2) and continue throughout the entire flowering period. Plants grown from seed have the added benefit of potentially producing a stronger taproot if sown directly into the field, while plants grown from clones develop a more fibrous root system (Horner et al., 2019). This is generally true for many types of seed vs. clones and is not specific to feminized seed. However, germination rates in the field can be poor, and often seeds are germinated in trays and transplanted into the field. When this happens, the taproot may not get a chance to penetrate deep into the soil early on and negate the potential agronomic benefits of using seed.

In summary, both feminized seed and female clones have advantages and disadvantages that should be considered before growing hemp. It is critical that growers use extreme caution when purchasing feminized seed because there is currently no certification program for feminized seed in the United States.

5. Which varieties for cannabinoid production do best in Utah?

Figure 3. Frequency of help cultivars produced in 2019
in Utah.
Data provided by the Utah Department of
Agriculture and Food Industrial Hemp Program.

When selecting varieties to plant, consider the number of frost-free days, labeled cannabinoid production, and other factors of interest such as plant size, vigor, and growth habits. Several varieties grow well in Utah, but CBD and THC levels are highly variable among them (Figure 3). There is little testing of varieties, so evaluate information about a preferred option before selection, and consider planting several varieties. In general, focus on varieties that have a high CBD concentration and a low THC concentration. Avoid varieties that are prone to “going hot,” or exceeding the 0.3% THC limit. The field containing plants that are tested above this level by the state’s agriculture department must be destroyed.

In 2019, the Utah Department of Agriculture and Food (UDAF) tracked all varieties that were registered by licensed growers that year (Figure 3). ‘Cherry Wine’ and ‘Cherry Blossom’ were the most planted, and ‘Sour Space Candy’ and ‘Tokyo’ were among the least. Of the samples collected and tested, 10% exceeded the legal THC level of 0.3% and had to be destroyed. The varieties that most frequently went hot were ‘Abacus,’ ‘Lifter,’ and ‘Wife.’

6. What yield and CBD/THC ratio might I expect?

According to UDAF records, there were over 3 million industrial hemp plants grown in Utah in 2019 when hemp was first legalized. Growers harvested an estimated 800,000 pounds of biomass that year. The dry flower yield of the plants typically ranged from 0.75 to 1.5 pounds per plant. State tests determined an average CBD content of 5.3% and average THC content of 0.28%. This means the average CBD/THC ratio was about 20 to 1. Most varieties that have been studied in controlled environments have a similar ratio.

7. How much fertilizer and other inputs should I apply to my hemp?

Hemp can be grown in a wide range of environments and soils. In general, growers have found success growing hemp under field conditions favored by grain crops such as wheat and corn (Kaiser et al., 2015). Like many crops, hemp does best in soils with a pH ranging from about 6.0–7.0 (Harper et al., 2018). Most Utah soils have pH levels above this ideal range, but hemp produced in 2019 and 2020 tolerated higher pH levels. Well-drained soils are preferred, and due to its high sensitivity to compaction, avoid growing hemp in soils with high clay contents (Baxter & Scheifele, 2009).

The suggested fertilizer recommendations vary depending on region and initial soil fertility. Perform a soil test in the prior fall or early spring before planting to determine fertilizer needs. Fertilizer recommendations for corn or winter wheat (Cardon et al., 2008) provide a good baseline for fertilizer amounts that will help maximize hemp yield.

For pest management, there are currently few pesticides labeled for industrial hemp, so control weeds, insects, and diseases through careful planning and preventive practices. When hemp is grown in the same field year after year, pest pressure can increase, so crop rotation is the centerpiece of any pest management strategy. Only grow hemp in fields where weeds have been actively and successfully managed in previous years so the amount of weed seed in the soil seedbank is minimal. A stale seedbed technique for weed management is common, where the soil is prepared for planting and pre-irrigated, allowing weeds to germinate and be removed before planting hemp. After hemp plants are established and actively growing, limited pesticide options may necessitate hand-weeding or between-row cultivation. The hemp canopy closes quickly, helping reduce weed growth, but is dependent on row spacing and planting method.

See also  How Much Are Weed Seeds

8. How does frost affect CBD and THC levels?

Once mature, hemp is a relatively hardy plant and can withstand frost well. A study at the University of Vermont in 2018 tracked the difference in temperatures and resulting CBD levels of hemp plants between those with fabric row covers and those left uncovered. They found that though the uncovered hemp plants experienced below freezing temperatures several times throughout the study, the overall CBD concentration was unaffected. They also found that frost and cold weather can cause the plants to change color, but this has little to no impact on CBD or THC levels (Darby, 2019). Some have found that frost’s ability to change the color of hemp plants also varies depending on the cultivar or variety of the plant (Bolt, 2020). Like almost every other annual crop, hard frosts will stop plant growth and cause hemp plants to begin senescence.

9. How do I harvest hemp?

The harvesting methods for industrial hemp vary greatly depending on the intended uses for the plants. The major uses include oil, seed, and fiber.

Because no equipment exists on the market specifically to harvest CBD hemp, most of the harvesting process must be done by hand or by retrofitting existing equipment. The hemp is ready for harvest when the trichomes on the hemp buds shift from white to milky white. It is important to routinely monitor and test the plants to avoid exceeding the 0.3% THC limit while still maximizing the CBD content.

When harvesting hemp for oil, plants are commonly cut down at the base using a machete or blade of some kind (Figure 4).

After they are cut, hang the plants upside down to air or heat dry (Figure 5). Breaking the plants down and separating them into individual branches will allow for better airflow and quicker drying. Ideal drying temperatures reported by some growers are between 60–70°F with humidity levels around 45–55%. Higher temperatures, as well as light and oxygen, can degrade cannabinoids and reduce flower quality. Therefore, maintain a cool and dark storage environment.

After the plants dry, growers strip the buds and leaves from the stems, either by hand or custom-built equipment (Figure 6). Bag the dried flowers and leaves and send them to a processor to have the oil extracted and dispose of the remaining plant.

Fiber

When growing hemp for the fiber, harvest plants between early bloom and seed-set or when about 20% of the male plants are flowering (William & Mundell, n.d.). Large parts of this process can occur using traditional hay-harvesting equipment, making it much simpler than other hemp harvesting methods.

The hemp is windrowed with a swather when mature, leaving about 4–6 inches of stubble in the field, where the hemp will then need to go through the retting process. Retting consists of leaving the cut hemp out in the field to dry for anywhere from two to five weeks. Retting helps break the bonds between the two types of hemp plant fibers: the bast (long outer fibers) and the hurds (short inner fibers). Rake the hemp two to three times throughout retting to keep the plants from rotting and remove leaves, making it easier to transport.

When the plants reach a moisture content of 15%, bale them using traditional baling equipment. The bales should have a moisture content of about 10%. Bale the hemp into either round or square bales, but round bales are less compact and therefore less susceptible to rotting.

Hemp Seed or Grain

Conventional grain harvesting equipment also accommodates harvesting hemp grain or seed. Use a combine to cut and chop the hemp plants. The hemp plants must be at 70–80% grain maturity at harvest to avoid seed shattering. The combine settings will be similar to those for grain sorghum, with the cutter bar raised about 40 inches off the ground. This decreases the amount of plant material going through the combine, thus reducing the risk for plants getting wrapped up in the machinery.

When harvest-ready, the hemp plants’ moisture will most likely be in the 15–30% range, making the seed or grain very susceptible to spoilage soon after harvest. It is best to clean the seed and dry it down to 7–10% shortly after harvest.

10. Who can process my hemp and where can I sell it?

This is a difficult question to answer as it varies greatly from place to place. Many growers have recently reported difficulty in finding places to sell and market hemp grown for oil. Hemp prices plummeted in 2020, and many frustrated growers could not process or sell their product. Some growers turned to specialty or direct marketing for income. Many lost large investments. Like any other specialty crop, it is wise to consult with an attorney to develop legal and binding contracts with hemp processors and buyers prior to investing in and growing hemp to guarantee that markets exist for harvested hemp. We recommended starting small to ensure that you do not lose more investment than you or your farm can afford. Unfortunately, we have received reports of farm failures due to large investments in unprofitable hemp acres. Thus, we suggest that growers use extreme caution when investing in production of hemp for CBD oil.

References

  • Baxter, W. J., & Scheifele, G. (2009). Growing industrial hemp in Ontario. Ministry of Agriculture, Food and Rural Affairs. http://www.omafra.gov.on.ca/english/crops/facts/00-067.htm
  • Bolt, M. (2020). Frost and hemp, should growers worry? [Fact sheet]. Purdue University Extension. https://extension.entm.purdue.edu/newsletters/pestandcrop/article/frost-and-hemp-should-growers-worry/
  • Cardon, G. E., Kotuby-Amacher, J., Hole, P., & Koenig, R. (2008). Understanding your soil test report [Fact sheet]. Utah State University Extension. https://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1825&context=extension_curall
  • Darby, H. (2019). 2018 Cannabidiol cold tolerance trial [Fact sheet]. University of Vermont Extension. https://www.uvm.edu/sites/default/files/media/2018_Hemp_Cold_Tolerance_Trial.pdf
  • DeDecker, J. (2019). Weighing the risk of cannabis cross-pollination [Fact sheet]. Michigan State University Extension. https://www.canr.msu.edu/news/weighing-the-risk-of-cannabis-cross-pollination
  • Harper, J. K., Collins, A., Kime, L., Roth, G. W., & Manzo, H. E. (2018). Industrial hemp production [Fact sheet]. Penn State University Extension. https://extension.psu.edu/industrial-hemp-production
  • Horner, J., Ohmes, A., Massey, R., Luce, G., Bissonnette, K., Milhollin, R., Lim, T., Roach, A., Morrison, C., & Schneider, R. (2019). Missouri industrial hemp production [Fact sheet]. University of Missouri Extension. https://extension.missouri.edu/publications/mx73
  • Kaiser, C., Cassady, C., & Ernst, M. (2015). Industrial hemp production [Fact sheet]. University of Kentucky Extension. https://www.uky.edu/ccd/sites/www.uky.edu.ccd/files/hempproduction.pdf
  • Lubell, J. D., & Brand, H. M. (2018). Foliar sprays of silver thiosulfate produce male flowers on female hemp plants. American Society for Horticultural Technology, HortTechnology, 28(6), 743–747. https://journals.ashs.org/horttech/view/journals/horttech/28/6/article-p743.xml
  • Meiner, C.H. & Mediavilla, V. (1998). Factors influencing the yield and quality of hemp (Cannabis sativa L.) essential oil. Journal of the International Hemp Association, 5(1) pp. 16–20.
  • Nahler, G. (2019). Cannabidiol and contributions of major hemp phytocompounds to the “entourage effect;” possible mechanisms. Journal of Alternative, Complementary & Integrative Medicine, 5(2), 1–16. https://doi.org/10.24966/ACIM-7562/100066
  • Schluttenhofer, C., & Yuan, L. (2017). Challenges towards revitalizing hemp: A multifaceted crop. Trends in Plant Science, 22(11), 917–929. https://doi.org/10.1016/j.tplants.2017.08.004
  • Small, E. & Antle, T. (2003). A preliminary study of pollen dispersal in cannabis sativa in relation to wind direction. Journal of Industrial Hemp, 8(2). https://www.votehemp.com/PDF/Small2003JIH.pdf
  • U.S. Cannabis Spot Index. (2018). Cannabis benchmarks. Retrieved October 11, 2019, from https://reports.cannabisbenchmarks.com/
  • Williams, D.W., & Mundell, R. (n.d.). An introduction to industrial hemp, hemp agronomy, and UK agronomic hemp research [Fact sheet]. University of Kentucky Extension. https://hemp.ca.uky.edu/sites/hemp.ca.uky.edu/files/uk_ih_information_for_agents3.pdf

Published June 2021
Utah State University Extension
Peer-reviewed fact sheet

Authors

Matt Yost, Megan Baker, Mitch Westmoreland, Tina Sullivan, Jody Gale, Cody Zesiger, Earl Creech, and Bruce Bugbee