A good germination stage is decisive in obtaining shoots that develop rapidly and end up with powerful seedlings. Learn to germinate marijuana seeds fast. Discover the most effective ways of germinating cannabis seeds indoors in an easy, fast and affordable way; the best tips and tricks.
How to Germinate Cannabis Seeds Fast & Reliably
Like any early stage in the cultivation of marijuana, carrying out a good germination is decisive in obtaining shoots that develop rapidly and obtain powerful seedlings.
In this guide, we will discuss how to germinate your seeds so they sprout in good condition, and how to treat them when they do.
Before you start, make sure you have your growing environment ready and time available to spend. Once the growing process begins, the plant will not wait for you.
Introduction To The Cannabis Seed
If you germinate a seed the right way, it will swell until it breaks the shell. The first thing you will see sprouting is a small white dot called a radicle. This is where the root of your marijuana plant will develop, and will be responsible for absorbing water.
The radicle will grow and push the seed up. Next, the first “leaves” called cotyledons will sprout, and these will finish breaking the seed until it can fully open. At this point, you should already have the plant in a medium where it can grow.
Next, the first characteristic marijuana leaves will emerge — the cotyledons are not really leaves, and they eventually dry out and fall off — as the root begins to develop.
Congratulations! Your plant has been formed correctly.
How Do I Know if a Seed is Healthy?
It is possible to germinate marijuana seeds found in a joint you got on the street. But the best way to ensure you have healthy seeds is to buy them from banks with a good reputation and history, and choose varieties of marijuana seeds for the type of crop you desire.
In general, any seed that is dark and does not break easily is a healthy seed that will germinate well. If the seed is white or pale green, it is likely that it will not germinate.
Obviously, it is always better to do the test before deciding to discard it: If a plant is born, it was a healthy seed.
How Do I Know If It’s Female or Male?
There is no physical difference. If you don’t know where the seed came from, it will be impossible to know the gender of the plant.
You will have to wait for the plant to grow and begin its flowering stage to know if it is male or female.
To ensure that the plant will be female, you can buy feminized seeds from a bank. If you don’t want to buy online, you can get seeds from a growshop in your city, which resell seeds from these same banks. In countries where legalization is more complicated, you will need to resort to donations. You can search for phone numbers for cannabis organizations or try Facebook groups.
I also wrote a guide about types of seeds.
What Does A Seed Need To Germinate?
– Moisture is the first thing the seed needs to activate; the radicle will break the shell in search of more moisture.
– Heat (just enough), the ideal temperature is between 70ºF to 75ºF (21ºC to 24ºC), which emulate spring conditions.
– Leave it alone while you wait for the radicle to appear.
– Be careful when you touch or move it. It is very fragile and can break.
– Oxygen is necessary for the plant to be able to breathe, not to be flooded with water.
– Darkness is not totally necessary, but it is good for the radicle to not have direct light.
Overall, humidity and temperature are the most important factors for a healthy plant.
Water is essential for seeds. You must always keep the germination medium moist — without flooding. If the plant dries out after activating, it will die. On the other hand, if you drown it, the plant won’t be able to breathe properly.
The plant will germinate better if you keep it warm. You can put a “normal” bulb close to it to give it heat — but remember that the root should not receive light. Even better, put the germination medium on top of the power supply of your Play, Xbox, laptop or the like you have. I do not recommend using 3DS, PS Vita or Nintendo Switch
The plant can develop in as quickly as 12 hours, or it can take up to two or four days. If more time passes, it will not germinate. In any case, do not underestimate the speed of seed growth. Have your growing environment ready and check the seeds a few times a day — without fiddling with them.
Marijuana Germination Methods
There are several methods to germinate seeds that are very simple and work perfectly. In the following section we will examine three of the most popular:
Activate them in Water
Letting the seeds soak in water overnight is one of the most widely-used methods by marijuana growers. Simply fill a glass with lukewarm water — between 70ºF to 75ºF (21ºC and 24ºC) — and drop the seeds inside.
Let them rest quietly until they open and the radicle comes out, at which time you will take them out of the water, taking care not to touch the radicle with your fingers, and plant them.
Some seeds take longer to sprout than others, but after 24 hours they could drown. If time passes and the seed has not sprouted, I advise you to transfer it to another germination medium and leave it near a heat source.
The following video on germinating with peat tablets (which I explain in the next section) explains the process of activating seeds by submerging them in water.
The most popular method, and the one I use most frequently, is to allow your seeds to sprout on kitchen paper:
- Put several layers of paper on a plate or a Tupper,
- Dampen the entire paper with a sprayer,
- Important! Drain the excess water in case there is too much; you do not want water to accumulate on the plate,
- Deposit the seeds on the paper, leaving a few centimeters of separation between them,
- Cover them with several other layers of paper and moisten again, and
- Cover them with another plate or lid and secure them so they don’t separate.
When everything is complete, place it on a warm surface. A good trick is to deposit it on a power supply like that of a laptop or a PlayStation as mentioned above. It should not be something that will be moving in the coming days.
If you can’t find a power supply, you can heat the paper up by bringing it “normal” lamps, and putting them on top of the refrigerator or anything that emits a little heat.
Now is the time to leave the seeds alone for a few days. Separate the papers only a few times a day to make sure you keep the paper damp, and to monitor when they begin to sprout.
Once the root has emerged from the seed and is beginning to open, it is time to transplant it into the growth medium.
Dehydrated Peat Pellets
If you don’t like crafts, one of the best methods is to use peat pellets or “germination pills” — they can be bought in nurseries, grow shops, etc.
Peat pellets are specific to start seeds of all kinds; they are very easy to use and will give the seeds the perfect condition to germinate.
- Activate the seeds by immersing them in water, which can be beneficial for using peat tablets,
- Once activated, the tablets are immersed in water — in a different container — to hydrate them for about five minutes so they take shape,
- Then make a hole in the pill and bury the seed, taking care that the root is down and the top is not buried more than 5 millimeters.
Transplanting Marijuana Sprouts To Soil Once Germinated
If you germinated on kitchen paper or a similar method, or activated the seeds in water, it is time to transplant them into a growth medium once the radicle expands. They are still very delicate, so this transplant should not be the only one, but the first.
Small pots or disposable plastic cups are a good option for growing the sprouts. I don’t recommend that you plant the seeds directly into soil or a pot because it will be more difficult to maintain the conditions you need to finish the process properly. A small medium will help you to regulate humidity and temperature.
You will need to get a good substrate, airy and loose. If you use soil from your garden, which is not the best medium, make sure that it does not form mud when it is wet and that it does not remain hard when it has dried either.
Transplanting Step by Step
- Fill your pots or cups with substrate.
- It is important to make holes in the cups for excess water to drain,
- Moisten the substrate without soaking it. Using a sprayer makes things easier,
- Make a hole in the substrate with a pencil or pen deep enough for the radicle to enter completely, but for the top to be barely buried at about 5mm,
- To transfer the sprout, take it gently and insert it into the hole with the radicle down,
- Cover the hole gently with a little soil so it can come out smoothly, and
- Moisten the top of the soil a little.
When planting the seed/sprout, try to use small tweezers so you don’t have to touch them with your hands. If you don’t have any, be very careful when handling it and do not touch the radicle with your fingers.
If you germinated the seeds in peat tablets, you can transplant the whole tablet into the glass or small pot. As for humidity, the same rules apply, moisten without soaking.
Make sure the substrate is always wet as time passes. The top will dry quickly, so stay alert and keep it moist, but be careful not to water it if it’s still wet.
Light: Now It’s Time!
This is when you must give them light. When the plants are outside, they open their cotyledons quickly to make way for their first leaves. Or you can put them indoors if you are growing that way.
If you are growing your plants outdoors, make sure the sun is not too strong; if the pot or glass heats up too much, the plants will burn. Put them where they receive sun indirectly, in a window, for example.
It may take a few hours or a few days, but in a short time the seedling will come out of the substrate looking for light. If after ten days it still has not left, it is likely that it will never do so.
Before moving to the final growth medium, wait until the seedlings are stable and have at least 4 leaves so that they can withstand the last transplant without too much stress.
The good thing about plastic cups is that you can cut them out, which makes it easier to transplant.
Common Germinating Mistakes You Should Avoid
Looking at them too much
Constantly uncovering the seeds to see how they’re coming along can stop the whole germinating process. You must be patient with marijuana and let nature do its work in peace.
If the growing environment is not warm, the seed will know that it’s not the right time to sprout. As mentioned above, the ideal temperature for the seed to grow is between 70ºF and 75ºF (21ºC and 24ºC).
Touching them with your Hands
Putting your finger in the radicle can cost you the crop. It is very fragile and easily separates from the seed. Always grab it by the part of the shell or, failing that, the cotyledons, and always do it delicately.
Too few water
I never tire of mentioning that marijuana seeds must be in a humid and moist environment 24 hours a day for it to grow. If you let the environment dry, the seed will die.
Too much water
Once the seed is open, it needs oxygen to live – if you don’t let it breathe it will die. If you use a water sprayer it will be easier for you to avoid going overboard. You should also always make sure to drain the excess.
Hard pipe water
Some cities have water that is loaded with salt or lime. In these cases, it’s better to use bottled water (and if you plan to irrigate your crop with this water you should find ways to clean it as it will also affect the growth of the plant).
The plant does not need fertilizers or stimulants during its first weeks of life. Compost soil could burn it. So, a quality growing soil will be necessary.
Planting them too deep
The seed must be buried deep enough so that it is barely covered and can easily break through. The ideal height is about five millimeters.
Using Moisture Domes?
According to the Mandala Seeds bank, it is not recommended to prevent ventilation using domes because it can quickly cause fungi in the germination medium.
On the other hand, Sensi Seeds bank does recommend them but you should take care not to use them for a long time. It also mentions the importance of ventilation.
Thank you for reading
Any of the methods listed in this guide will achieve a germination percentage close to 100%. But remember, there will always be seeds that do not germinate; even the most prestigious banks cannot guarantee that all their seeds will sprout.
The interesting thing is that although some will be unsuccessful and others may take longer, some will open quickly and grow strong. This will tell you from the beginning which are the most vigorous plants, and they are probably the ones you will choose if you want to have mother plants to make clones or your own seeds.
Now that you know how to germinate and transplant the seedlings, the next thing to study is how to take care of your plants in their first weeks of life. Everything has to do with the growing environment you have prepared before starting to germinate, or you will not have enough time to treat your seedlings properly.
In a short time, I will write guides on preparing your growing environment — whether you are going to grow outdoors or indoors — and on the treatments for the first week of vegetative growth. If you want to be alerted when they’re published, sign up for my mailing list below.
Germinating Cannabis Seeds – Different Methods
A seed is a plant that’s waiting for the right conditions to germinate and grow. This post is designed to teach you how to germinate cannabis seeds as efficiently as possible in order to obtain successful results during this delicate phase.
Table of Contents
Cannabis seeds (or marijuana) germinate when they’re in the right conditions for successful growth. In nature, this process occurs on its own around springtime; moist soil begins to heat up with the increased sunlight and the inclination of the earth. We’re going to give a quick overview of the different methods used when it comes to germinating cannabis seeds.
Under these conditions, seeds germinate in soil protected from direct light and in an airy substrate. Once they’ve germinated they will begin to take root in the soil.
- Humidity: alongside heat, this activates seeds and softens the protective shell. Once the seed has germinated, it will need moisture to survive.
- Darkness: roots are incredibly light-sensitive, so they’ll need to be in the dark in order to guarantee germination.
- Heat: alongside humidity, heat activates seeds and indicates that the conditions are right to begin growing. It’s important to maintain temperatures between 20 and 26°C during the germination process.
- Oxygen: it’s important to periodically open the container in which you’re germinating your seeds in order to renew airflow and give your plants’ seeds more oxygen.
How to Germinate Cannabis Seeds
There are many different germination methods when it comes to cannabis seeds, from simple to complex processes. In this post we’re going to go through the most common methods used that, when done with a care, can be 100% effective.
Germinating Cannabis Seeds in Paper Towels
Germination in paper towels is La Huerta Grow Shop’s preferred and recommended method due to how efficient and easy it is, as well as being the cheapest method. Cannabis seeds ready to germinate in paper towels
- Absorbent paper towels (kitchen)
- Two plates or plastic, opaque Tupperware with a lid.
- Sprayer (optional.
- Latex gloves.
We highly recommend using latex gloves during the entire process in order to avoid accidental contamination via fungi or virus.
You can also use Germinator Pro to help you with this process; it comes with everything needed for the germination process, including a thermometer on top of the germinating container.
Steps to follow
- Place 6 – 8 paper towels on a plate or in your Tupperware, and pour in small amounts of mild water until they’re covered. Squeeze them softly until they’re moist but not soaking.
- Place the seeds on the paper towel “pillow”, keeping them a distance a apart so their roots don’t end up intertwining. The less you touch them with your hands, the better.
- Wet another 6 – 8 paper towels, squeeze to remove excess water and place them on top of your seeds.
- Place the second plate upside-down on top (or the Tupperware lid) in order to guarantee darkness. You can close the lid entirely or not, depending on how fast the paper dries. Keep in mind that you need to keep the paper towels moist until the last seed germinates. If you close the lid fully, open it once a day to make sure they get more air and to check if they’ve germinated.
- Place the seed container in a warm area without direct sunlight, keeping the temperature between 18 and 25°C. At La Huerta Grow Shop we’ve noticed that cannabis seed germinate faster and better when placed over very light heat sources like a router or on top of the fridge, which generate high enough temperatures to stimulate germination.
- Observe the process and maintain humidity. If the paper dries up, spray it again until it’s moist. Seeds don’t always germinate at the same time, so we recommend transplanting when the root is between 1 and 15 cm. If you leave germinated seeds in the container for too long, the root may grow too long and make them harder to handle. This initial root is highly delicate; we recommend using latex or plastic gloves.
- Transplant your seeds. You’ll need to wash the soil and make a hole as deep as the root; place the seed in with the root facing downwards. This allows the first two leaves to sprout above the surface of the substrate. The substrate should be moist – not soaked – until the plant grows its first pair of real leaves. During this delicate phase, the amount of moisture available is crucial; don’t let it dry out too much, but don’t over-water. We recommend using small amounts of water frequently.
*if you’re using a heater or heating mat, keep in mind that your seeds are in a container and not a flowerpot, so the heat may be excessive.