How To Grow Marijuana From Seed

ILGM

Buy Cannabis Seeds Online

Growing marijuana indoors isn’t as impossible as you might think. Learn how to grow plants inside with this step by step guide with infographic. Want to grow cannabis from seeds? Read on for everything you need! Includes info on your genetics, lights, nutrients, grow tents, soil media, and more! Learn how to grow the best indoor plants from seed to harvest with this complete, in-depth guide. Read now.

How To Grow Marijuana From Seed

Article written by

Dipak Hemraj Head of Research and Education

Dipak Hemraj is a published author, grower, product maker, and Leafwell’s resident cannabis expert. From botany & horticulture to culture and economics, he wishes to help educate the public on why cannabis is medicine (or a “pharmacy in a plant”) and how it can be used to treat a plethora of health problems. Dipak wants to unlock the power of the plant, and see if there are specific cannabinoid-terpene-flavonoid profiles suitable for different conditions.

Medical marijuana products promise to deliver therapeutic benefits equivalent to pharmaceutical drugs but with no toxicity. Medical cannabis’s effect on the…

We look at ten of the most important cannabis cultivators around and break down why their worth a follow on your social media platform of choice. Click here.

The main difference between male and female cannabis plants is that males don’t yield buds, while females do.

Keep updated with our social media

Leafwell HQ
Phone: +1 (800) 660-9085

©2022 Leafwell. Note: Information on this site does not constitute medical advice or legal advice.

How to Grow Cannabis from Seeds in 7 Steps: The Ultimate Guide to Your Best Cannabis Grow – 2020

Growing cannabis from seeds is easier than you might think. Read on for info on genetics, soil & other grow media, grow tents, lights, nutrients and more!

Before we begin, I’ll be straight with you: All you really need to grow cannabis from seeds is a pot, grow media like soil or coco, seeds, water, plenty of light, and a few nutrients. That’s it. Of course there are other supplies you could use such as a grow tent or high performance LED light, but they’re not always necessary. Cannabis has a long history of wild growth without any help from people. There’s a reason they call it “weed,” and that’s because it grows like one.

But even though you can grow cannabis without any special equipment, there’s an advantage to spending a little money on the right equipment. Industry experts are constantly improving their products which in turn help produce higher cannabis yields and a better flower. So today, as part of our mission to educate and provide valuable information, we’re going to go through each stage of your cannabis grow and highlight some of the equipment that can help you maximize your harvest.

Do you want to learn how to grow cannabis? Check out Growers Network University!

1. Cannabis Genetics

Genetics is just a fancy word for your seeds, and that’s what you need if you want to grow cannabis from seeds! The term can also refer to cannabis clones, but for the beginning grower, seeds are much easier to source. If you are interested in starting from clone stock, you can generally purchase them from a qualified local grower, assuming there are no laws against clone sales in your jurisdiction.

But which Cannabis seeds to buy? That depends on your grow style and personal preference. You’re going to choose an Indica, Sativa, or hybrid or course, but do you want regular seeds, feminized seeds, autoflowering seeds, or some combination? With regular seeds you’ll have to remove any males before they mature and pollinate your females or you’ll end up with seedy, low-quality buds. Additionally, cannabis grown from regular seeds will only flower in response to a change in the photoperiod (how many hours of light they are exposed to) so farming these types of seeds requires a bit more care and attention than autoflowering strains (which produce buds when they are old enough, not in response to the light) or feminized seeds which eliminate the need to monitor for males. If you’re looking for the simplest type of seed, you can go with autoflowering, feminized seeds.

Note: See our cannabis seed FAQ section below the article.

2. Cannabis Germination

Germinating refers to sprouting your cannabis seeds prior to planting. This isn’t always necessary when growing cannabis from seeds, but it WILL improve your chances of germination. The easiest way to do this is to fold your seeds inside of a moist paper towel and wait for a few days, making sure your paper towel remains moist. In this time you should see your seed “pop” as the tap root emerges. Now you’re ready for planting.

If you want a more controlled germination of your cannabis seeds, there are mini-greenhouses available with starter pods which allow your seeds to begin rooting prior to transplanting them into your grow media and offers an overall safer transition from germination to pot.

You can have a look at germination domes here.

3. Grow Media, Grow Tents, & containers

More than likely, you’ll be growing indoors in a grow tent and in soil. There are a variety of media types available including soil, peet, and coco. We recommend soil for the beginner, but whichever you choose it’s important not to skimp on the media. Spending a little extra money on your media will pay off in terms of cannabis quality and help you avoid problems such as pests, unbalanced pH, and poor nutrient delivery. You can see a few recommended soil and other media products here.

You’ll probably also need a pot. The pot you choose should be at least one-gallon and allow excess water to drain off. Once you’ve added the media to your pot and have your seeds, you’re ready to plant. Just insert your finger into the soil to create a ½ inch to 1 inch divot and place your popped seed inside. Cover and water appropriately. We recommend fabric pots which are reusable, lightweight, and drain very well.

The last thing to consider when planting your germinated seeds is where are you going to grow them? Are you growing in a closet? Do you have a dedicated space somewhere in your home? If not, a grow tent is an excellent option for creating a highly controlled growing environment. Grow tents are easy to assemble and their reflective interior maximize light efficiency. There are even kits that will provide everything you need including a fan to generate necessary air flow and a filter that will help keep the smell of your plants from wafting from your grow tent into your personal space. Even if you don’t mind the smell, your neighbors might! You can check out this grow tent configurator which will guide you through the best grow tent set up depending on the space you have available and the number of plants you plant to grow. You can check out our recommended soil media here. Need a pot? Check these out.

4. Cannabis Grow Lights and the Vegetative Phase

The vegetative stage is where your plants bulk up and develop the frame necessary to support the eventual flowers. As mentioned in the genetics portion of this guide, your seed choice will influence the amount of care and attention you’ll need to provide. If you choose regular seeds, the vegetative stage of cannabis growth will require an 18-6 light cycle (18 hours on and 6 hours off). The size of your grow will determine your light requirements and there are many choices. I tend to recommend LED lighting because they’re energy efficient and produce less heat than other types of grow lights, which will help keep overall temperatures down in your grow. Check out a few LED recommendations for your cannabis grow here. Keep in mind the size of the light if you’re using a grow tent to assure it will fit.

Fluence is a great LED brand, but far from your only option.

The vegetative phase is also where you begin monitoring the sex of your plants and then remove and destroy the males as soon as you identify them. If you have access to female clones, this step isn’t necessary, but it will be if you grow cannabis from seeds. You can check out our guide to sexing your plants here. Again, this is a step you need to take when growing from regular seeds. If you use feminized seeds you can be nearly 100% certain that all of your plants are female (1 in 1000 feminized seeds may turn out male).

Since the vegetative stage of growth is where your plant will bulk up and develop its framework, you’ll want to make sure you use some quality nutrients to ensure your cannabis grows strong and healthy. Click here for our recommendations.

A nutrient bundle is a great way to save money

Last but not least, an important consideration during the vegetative stage is pest control. It’s important that you monitor for pests and diseases during the duration of your grow to deal with any problems before they reach crisis level and threaten your crop. Fortunately, close monitoring and cleanliness will help you avoid most of these problems, but should you encounter pests or disease, there are a number of great, organic products that can take care of nearly any problem. And don’t worry, we recommend only products suitable for treating consumable plants. Check them out here.

5. Flowering & Nutrients

The flowering stage is when your cannabis plants will develop their buds. Again, if you choose to grow from “regular” seeds, you’ll change up the light cycle from the 18-6 you used in veg to a 12-12 cycle (12 hours on and 12 hours off up until harvest); autoflowering varieties won’t require this change as again, they flower when they are mature enough.

During this stage you are going to want to continue monitoring for pests and also add a “bloom formula” nutrients to help make big healthy buds. See our recommendations for your cannabis grow here.

6. Cannabis Harvest

A week or so before harvest you’re going to want to “flush” your media. This simply means that you stop feeding your plant nutrients and give only water. This allows your cannabis to use up all the available nutrients remaining in the soil so they won’t end up in your buds. Also, you can expect a degree of leaf yellowing during this final week as your plant converts its available resources into energy for continued bud development.

You can see our full article on when to harvest your buds here, but generally, you can determine when your buds are ready for harvest by examining the trichomes. You can use microscope to get a close up look at the trichomes. Clear trichomes generally mean it’s too early to harvest and your buds won’t be as potent. Milky white-amber trichomes means you are ready to harvest and can expect decent buds. If you wait longer, until the trichomes are completely amber in color, you’ll get a stronger psychoactive effect as CBD levels decline.

Harvesting generally requires scissors or gardening shears to remove your colas (bud sites) from your cannabis plants. Be gentle as to not disturb the potent trichomes.

7. Drying and Curing

Before we go into drying and curing, we should quickly revisit trimming. Trimming can be done before drying (wet trimming) or after drying (dry trimming). Either method is fine and will depend on your preference. The goal when trimming isn’t only to make your buds pretty by removing any fan leaves (which it definitely does) but also to collect the “sugar leaves” that surround your buds. Don’t get rid of these sugar leaves. They’re great for extracts, hash making, and in a pinch you can even smoke them, though smoking them will be a bit harsh.

With proper temperature and humidity control, you’ll be able to dry your cannabis in the same space you grew it. Most growers I’ve spoken with dry for a minimum of one week and often up to 10-14 days. There are a number of drying racks available that will allow you to spread out your buds for even drying. If you choose to dry trim, you’ll do this after drying but before curing.

Curing is a specialized drying process that comes after the initial drying and trimming. The goal is to cure the buds much like you would with homegrown herbs. You want a dark space with low humidity. You can cure in a glass jar, plastic tub, or a specially designed c-vault. You’re going to want to “burp” your container daily to remove any moisture remaining in your buds, and this is accomplished by simply opening the container and closing it again. The curing process can last anywhere from a few days to a couple weeks. Check out a few helpful products here.

A hanging mesh drying rack is only one option for your drying needs.

The CVault is designed to provide complete darkness and airtight bud curing.

So are you ready to grow cannabis from seeds? Hopefully we provided some good tips for media, lighting, and grow tents to get you started. We’d love to hear from you regarding your grow so please leave a comment in the survey below or click one of the “Join Now” buttons at the top and bottom of this article to get into our private, vetted, professional forum. And don’t forget to check out Growers Network University! See you there and happy growing!

A few questions about mail order cannabis seeds

Where can I buy cannabis seeds safely?

There are a number of good seed vendors out there. Our recommendations are established companies with great customer reviews so you know you’re purchasing quality cannabis seeds.

Is it safe to order cannabis seeds through the mail?

People always wonder about the legal risk of purchasing cannabis seeds through the mail. Legitimate seed vendors (including those we recommend) ship discreetly to most locations. Seeds can be stopped by customs, but this doesn’t happen often. You also want to make sure that wherever you decide to purchase your seeds will also ship to your country. This information should be transparent and available on the vendor’s website.

Before You Purchase

Questions you should ask before purchasing Cannabis seeds online
  • Do you recognize the name of the cannabis seed company name? Branding goes a long way and a recognized, established brand is something to consider when purchasing Cannabis seeds online.
  • What are customers saying in their reviews? Did they receive their seeds? Were they high quality?
    Researching these questions will increase your chances of being happy with your Cannabis seed purchase.
  • Do you know anybody who has used them as their Cannabis seed supplier?
    Word of mouth recommendations are very powerful in the cannabis community. Someone else’s first hand experience can be helpful if you aren’t sure about which brand of Cannabis seeds to purchase.
  • What’s their return or refund policy?
    A good seed shop should at least have generally positive reviews and a well-defined refund or exchange policy.

Beware of cannabis Seed Scams

If you’re contacted via social media to purchase seeds, chances are you’ve been targeted for a scam. We recommend using established cannabis seed vendors such as those linked above.

Complete Beginner’s Guide to Growing the Best Plants from Seed to Harvest

Want to grow plants at home? Wondering how to get started or what equipment you might need? Not sure you’ve got enough space or whether it’s going to be cost-effective? Whatever your question, in this step by step grower’s guide we’ve got you covered. Think of this as Cannabis Growing 101. You’re about to start learning, step by step, how to grow your first crop of lush, green marijuana.

The First Step: Choosing The Right Seed

True, there is another way to get started, by taking a cutting from an existing plant and cloning it… However, for beginners, we’d recommend growing from seed. Germination rate is 85% or above, whereas the success rate for growing cloned plants is around 50%. And you need to have access to a plant to take the cutting from, which isn’t going to be the case for most beginners.

See also  Bulk Marijuana Seeds Pittsfield

How to Choose Cannabis Seed

The seed is like a sleeping embryo, the result of sexual propagation between male and female flowers. Only healthy parent plants will produce healthy top quality seeds. All the features of the plant, be it the height, color, aroma or quality, all depend on the seed. If you want good quality marijuana, you need good quality seeds. Check this well-known site that offers a wide variety. But how do you select a seed worth growing? Avoid pale seeds, green seeds, and soft or damaged seeds. These are not mature or ready for germination. Cannabis seeds should have a hard outer shell. So what you’re looking for is hard, dark brown teardrop-shaped seeds, with darker tiger stripes (these are usually Indica seeds) or brown, black or tan mottling (usually Sativa). There are numerous strains of seed available. But whatever the strain, you’ll also need to choose between regular seeds that could produce male or female plants and feminized seeds that should produce only the bud-producing female plants you’re aiming to harvest. However, with feminized seeds, there’s still about a 5% chance of hermaphrodite plants, which produce both male and female flowers and self-pollinate. (You can also check out this beginner’s guide to choosing your first seeds.)

Germination of Cannabis Seeds

After selecting the right seed, the next step is germination. https://youtu.be/x4Eg7qw0x2U Germination is a process in which the outer shell of a healthy and mature seed, kept in the correct environmental conditions (moisture, air and warmth), breaks down and a white colored root begins to sprout from it, dropping downward. Here’s what you need to learn: only 2 or 3 out of 10 non-feminized seeds will become healthy female marijuana plants, others may spoil or grow as male plants. So take that into account when deciding how many seeds to germinate. The average time, a healthy seed takes to germinate is about 2 to 7 days, but the period may vary depending on quality of seed, temperature, moisture, etc. After the germination process, you’ll be looking to remove all the male or less developed sprouts and focus on raising the healthy female marijuana plants. (More on that later.) If you don’t have as many female plants as you’d like, you may want to begin another germination process as soon as possible. Our advice is also to germinate in the hot months for more effective results. A growing/grower mat can help germination too, but is an extra expense. Once the seed has germinated, the white colored, root-shaped sprout should grow longer and longer. When the size reaches about a quarter inch it’s the perfect time to transfer it to another medium such as rockwool tray or any other pot where it has space to become a baby plant. From there, it will eventually be transferred into the garden or a hydroponic system.

How to Germinate a Cannabis Seed

There are many techniques to start germination. But one good tip for the beginner is to practice them on other common seeds first, rather than waste expensive marijuana seeds. The different techniques for germinating seed are as follows:

Soaking

This is the most reliable technique of germinating marijuana or any other seed. In this method you need a normal coffee cup filled with warm water. Put the seeds into the warm water. If some seeds float to the top, remove them. The next step is to cover the cup with a lid so that light is unable to reach inside. Expect the seeds to germinate in the following 48 hours or so. Some seeds will even begin to sprout within 24 hours.

Germination in Soil

Some farmers prefer to germinate in the soil. This method is also easy and it really works. You need to take a pot filled with soil, pour water in it and let it drain from the hole at the bottom of the pot. Dig a little soil from its surface and push a pencil or any other pointed tool down about a quarter inch deep. Now put the seed in and then fill up the space with the soil you dug from the surface. Spray water and keep it moist until you find a small sprout coming up from the soil. Remember that it will require a normal room temperature to germinate in soil, which is around 78 degrees Fahrenheit. Usually, with this method seeds take 5 to 7 days to germinate.

Propagation Kits

Propagation kits are inexpensive and give good results. They will come with their own instructions, but generally you have to pour the seeds into tiny pots or compartments, add the germination hormone or nutrient mix that comes with the kit, and the process gets started. You can even create your own propagation machine, although purchasing it from market doesn’t cost you much.

Paper Towel Method

Two dishes, two paper towels and some water is needed for this method of germination. You have to boil some water, rinse both the dishes with it so that there are no germs left. Now soak the paper towels in the hot water and squeeze them so that they become damp and warm. Place one paper towel on a dish, put some seeds on it, cover them with another paper towel and then use the second dish as a lid. This is necessary to prevent light entering this environment. Seeds will take 2 to 5 days to germinate through this method. Remember that you don’t want to leave the germinated seeds on towel for too long. Transfer them from the paper towel as soon as the sprouts show their tips.

Germinating in Peat Briquettes

Soak a peat briquette in water and let it swell. Now push a seed into the hole. Keep it in a hot temperature, like in 95 degrees Fahrenheit. Keep it moist and wait for the sprouts to come out. This is the safest and most reliable method of germinating a marijuana seed. Note that you can select any of the above mentioned methods of germinating seed. Go with whichever suits you the best.

Cannabis Seedlings

Once you see that the sprout is a quarter inch long then it’s time to replant it in a pot, where it will grow up to become a small marijuana plant. A marijuana seedling is basically a pair of two leaves that is generally called a ‘seedling leaf’ or ‘cotyledon’. The function of the cotyledon is initially to store the food and make the up-coming plant healthy. When the real leaves arrive, the cotyledon gets paler, yellow and then drops down. Real leaves at this stage of marijuana plant growth have 3 lamina. At this early stage, a baby plant needs intense care. Don’t water the plant too much—big mistake. Also pay attention to the amount of light it’s getting. If you’re a newbie grower, it’s worth noting here that the growth of plant appears slow at this stage. But in fact what’s happening is that the root system is developing. So do not over-fertilize or over-water the plant to increase its growth rate. It can kill your plant. Remember also that the marijuana seedling requires approximately 16 hours of light on a daily basis. Set your light to 15/30/30 (15% red, 30% blue, 30% white).

Transplanting

Whether you have your seedling process in a rockwool tray or in a pot, now is the time to transplant those seedlings into the garden or hydroponic system, where they will start to really grow and produce the material for some top quality weed. When transplanting the seedling, you should dig a hole in the soil and place the seedling carefully inside. You can drop the seedling in along with the rockwool tube, don’t worry. It won’t affect the growth of the plant in any manner, and removing it could damage the roots.

What You’ll Need to Monitor During Growing

Now that your plants are growing and becoming a strong crop, you need to be careful with a few things. First and foremost, keep an eye on nutrient deficiency or excess. Both can have similar symptoms. But in general, look out for: lightening then yellowing in older mature leaves; spots of different kinds; various sorts of discoloration. The 3rd to 5th week can be the best time to determine whether your plant is growing healthily or not. If the color of the plant is perfect green, branches are strong and dense and everything looks fine during this period then you should be satisfied that it is growing the right way. Sometimes it appears that the stems of the plant in its early days are purple in color. Don’t worry. it’s a normal thing. It happens just because of genetics and nothing else.

Low nitrogen level is good for female plants, while high nitrogen levels produce and nourish male plants efficiently. Too low and you’ll see lightening and yellowing of the leaves. Moreover, keep the potassium level low for encouraging the growth of female plants and vice versa for male plants. Too low and you’ll see a brown burnt-look to the tips and edge of the leaves, turning yellow further into the leaf. A general excess of nutrients—usually known as “nutrient burn”—is diagnosable by yellow or brown tips to the leaves. If nutrient levels aren’t reduced, you’ll see the discoloration travel further into the leaf and the tips will start to curl and become brittle. However, don’t worry too much when you see initial signs in young plants, as the more they grow the more nutrients they need. The soil might be too rich for them now, but when they’re a bit larger it will likely be ideal. Try to keep control over humidity and temperature if you are growing plants indoors. High humidity helps in increasing the growth rate of female plants, while low humidity is good for the growth of male. Likewise with the temperature: low temperature is helpful for female plants’ growth, while high temperature is good for male plants.

Temperature and humidity levels for female plants at different growing stages:

  • Seedlings: 20-25ºC with lights on, 4-5º lower with lights off; 60-70% humidity.
  • Vegetative: 22-28ºC; 40-70%.
  • Flowering: 20-26ºC; below 55%.
  • Late flowering (1-2 weeks before harvesting): 18-24ºC, 5-10º lower with lights off; 30-40%.

Recommended light settings for indoor cannabis at each growing stage

  • Seedlings: 15/30/30 (15% red, 30% blue, 30% white). Once seedling has leaves and has been above ground a week, 30/60/60.
  • Vegetative: 30/60/60, 45/80/80 or 60/100/100 (depending on plant type, check recommendations when buying the seeds).
  • Flowering: 100/100/100.
  • Late flowering: 100/70/100.

N.B. These are the settings recommended by Kind LED. Their LED Grow Lights (some of the best on the market) allow setting red, blue and white levels individually.

How to Grow Seedlings into Mature Marijuana Plants

Now you are going to learn the most important things you need to know to become a perfectionist marijuana grower. It’s up to you which method and medium you select to grow your indoor marijuana. The topics we’re going to cover in this chapter include:

  • Growing with Soil Using Germination Process
  • Growing by Cloning Process
  • Growing Hydroponically

We recommend first-time growers go with the most reliable means of cultivation, which is soil. The reason is simply that it is a cost-effective method and has fewer risks, compared to other methods. However, we’ll give you the step by step guide for all three of these cannabis growing methods, so that you have a proper idea of what method suits you the most and why.

Growing with Soil Using Germination Process

We’ve already covered why growing marijuana with soil is the best method for beginners. It is cost effective, fruitful and reliable. If you’re not interested in turning this growing thing into a large business, then you may choose to grow in the containers. For the beginners, growing in containers is easy to handle and has less chance of failure.

Growing in Containers

Growing in containers, you have a chance to look after each and every plant individually. This allows you to identify weak or poor quality marijuana plants early. A container can be of any sort including a pot, small bucket, wooden box or other similar thing. All you need to do is to make some holes (about 1 centimeter diameter) to drain out excess water and get air to the roots. Make sure that the color of the container is dark, ideally black, as it is helpful in ensuring light doesn’t penetrate to the roots. You can start off with small containers as they are much easier to handle. But you must be aware that as the roots of your plants grow longer you’ll eventually need to shift the plants (very carefully, so as not to damage the roots) from small containers to the larger ones—usually soon after you realize that rapid growth is beginning.

Make Your Own Container

You can prepare your own container using old and rejected pots, broad sized bottles and bowls. You should clean them first and then make appropriate sized holes beneath the pots. The holes must be big enough to drain all the excess water out. And ideally the container material shouldn’t let in the light.

Growing in the Ground

If you are growing marijuana at home, then you may not be able to find a suitable space to grow marijuana in the ground, outside, where there is abundant sunlight. But if the option’s available to you, it’s worth doing. You have to be careful about the spacing of the plants. Try to leave an appropriate but uniform space between each plant (3-4 feet, or more if you have the space) so that the productivity is maximized.

Choosing Soil Type

Remember that if you are growing cannabis in soil then you have to be choosy in selecting the type of soil. Make sure that the soil you are using for marijuana cultivation is drainable but does not completely drain all the water. It should be capable of retaining some water. The three factors to consider in selection of appropriate soil for marijuana include nutrients, PH level and texture. Organic soil has the capability to produce the best quality cannabis crop. Texture of soil also has a major role in the growing process of cannabis so make sure that it is fluffy, light and can drain excess water but retain what’s needed.

Transplanting Cannabis Plants

Transplanting means to convert the plants from small containers to bigger ones or shifting them from containers to the ground of your cultivating area. The method of transplanting is simple, but not easy. You need to take the plant out of the container carefully, along with the roots and all the soil around them. Dig the next home for this plant from its center and then place it in the hole. Transplantation can cause a little damage to the root system and some stress to the plants so they need some time to settle down. We would advise transplanting at night so that plant has an appropriate time to rest before light starts it growing and photosynthesizing again.

Main Nutrients Needed For Growing Cannabis

Plants need vitamins and minerals just like people. You can mix and match your own nutrients using our directions on the required ingredients, but why not choose an all-in-one starter pack like the one below? If you decide to make your own nutrient concoction, below are the main nutrients which play an important role in the growth of marijuana:

Nitrogen

Nitrogen is the most essential element that helps in leaf and stem growth. Too little nitrogen leads the plant’s leaves to turn yellow. So use as much nitrogen as you can, especially during vegetation to make sure that the growth of the plant occurs in the finest way.

Phosphorous

Phosphorus plays a key role in the process of photosynthesis and respiration. It is advised to use more phosphorus than nitrogen during the flowering.

Potassium

Potassium is necessary for the building and transferring of sugars for marijuana plants. It is also an important element for absorption of water and nutrients, aiding rapid growth of the plant.

Watering of Marijuana Plants

Watering depends on the size of the plant’s container and the light’s intensity. HID lights due to the high level of heat given off affect the water level of plant. In general, you need to water your crop every other day. Roots want air as well as water, so a little bit of dryness is healthy for the plant—but not too much, otherwise the plant will suffer from dehydration. Water until about 20% of the water drains through the runoff hole at the bottom of the container. Then empty the runoff tray, rather than let the container sit in that water and reabsorb it.

See also  Growing Weed Seeds In Cotton Balls

Checking pH Levels

The pH level of marijuana plants needs to be monitored very carefully. 6.7 to 6.2 level is the best condition for the survival of your marijuana plant. Not paying attention to pH levels can lead to the devastation of the whole crop. Over feeding of fertilizers and organic compounds may cause disturbance in the pH level of a plant, so make sure to do your research before using any fertilizer. As far as fertilizers go, common manure fertilizer will do just fine for marijuana. You don’t really need to find some super extraordinary ultra-nutrient. So you are now almost done with the main guidelines about marijuana cultivation in soil. The only thing that remains is the level of lighting, which we will guide you through in detail later on, after we’ve talked about cloning…

Cloning Method for Growing Marijuana

Cloning is one of the smartest methods to grow marijuana and is widely used by farmers and indoor marijuana growers.

How Do You Clone?

Choose some donor plants, then take cuttings from them and grow the cuttings in a separate medium. You’re essentially creating mini-copies of the original plants. The big advantage is that each clone will turn out to be a female plant—i.e. the kind you’ll harvest hopefully giant buds from.

There are, however, some drawbacks as well to cloning, but if you already have some healthy and productive marijuana plants it’s a great way to produce more. You can easily select some donor plants from existing plants in your crop and then make some clones out of them. But let’s have a closer look at the benefits and drawbacks:

Benefits of Cloning

  • It is a time saving process, because all you need to do is to select some plants, make the clones and place them in their growing mediums. In the seed method, it takes days in germination, growth of seedlings, and so on.
  • It saves money as well, because you don’t need to buy any seeds.
  • Your plants are guaranteed to be female.
  • They grow much faster than seedlings, since they’re essentially already as mature as the plant the cutting was taken from.
  • Rooted clones of marijuana take less time in flowering.
  • Growing lots of marijuana at once becomes a much easier process, as clones take so much less time to grow.
  • The characteristics of your final product will be the same or even better in taste, aroma and effects every time.

Drawbacks of Cloning

  • Due to the genetic uniformity, there is more chance of plants succumbing to pests and diseases.
  • Less variety. If you go with the seed process, you can grow something different every time—try different tastes, aromas and effects.
  • Cloning can be workable and reliable if you are taking cuttings from your existing marijuana plants that you know well. Finding them from other sources and getting perfect results is far from guaranteed!
  • If you choose a poor plant to clone from, you’re stuck with that plant’s flaws.
  • They can easily die of shock if a little mishandling happens. QUICK TIP: Always take more clones than you need to allow for the inevitable.
  • Clones are very sensitive, so are not that easy to handle at all.
  • All the clones are always going to be females. Which makes breeding a problem in the future.

Step by Step Guide to Cloning Cannabis Plants

Below is the easy and step by step guide to making your clones:

Initial preparations

  • The first and most important thing you need to do is to choose the mother plant. Remember that all the future product depends on it, so choose a healthy, productive and disease free mother plant.
  • You should cut 50% more clones than the number of plants you need. Not all the clones are going to become healthy plants. Many of them may die from shock.
  • You can cut the clones at any time during the plant’s cycle but supposedly the best time is before the plant starts flowering.
  • Your hands must be washed with a good antibacterial soap; all your tools and growing area/medium must be clean too.
  • For immediate planting, a pH balanced medium should be prepared.
  • Keep all the clones nearby you within immediate reach at the time of their planting; exposed clones will wilt quickly.

How to take a cutting

  • Select the appropriate clones: actively growing plant tops, having two to three nodes/branches only with fan leaves (mature plants have alternating leaves, rather than facing ones). See photo below.
  • Cut a lower node or two at the stem.
  • Treat your clone in a good quality rooting solution, and make sure at least the lowest node is thinly covered.
  • Now fix this clone in a rockwool cube.
  • Do not forget to prep the rockwools by soaking them overnight in a pH balanced solution.
  • Clip large leaves in half to ensure that the clone focuses on creating roots.

Growing clones into mature plants

  • The next step is dome and lighting. Spray inside the humidity dome or propagator with No Damp solution (or equivalent). Do not spray the clone direct as it may result in powdery mildew.
  • Place the covered clone tray with humidity dome at a spot where an appropriate amount of white fluorescent light is available. This light can be natural sunlight or T9 grow light, or even an HID light if you’re careful.
  • The humidity dome should be removed from the clone tray on the 5th day. But remember also to lift the lid daily for air exchange.
  • Water every other day. Then once a day when the dome has been removed.
  • Now you have to check if the plant is rooted yet or not. For checking, you can tug the plant lightly toward upward side. If the plant is rooted, it will not come out of the cube. If it is not, it will come out of the cube easily. Please note that you are not supposed to do this until the 5th day. Rooting can take 5-10 days.
  • If you see some leaves turning to yellow at this early stage, it is actually a good sign so don’t worry. It happens because during the process of rooting, the plant consumes all the nutrients from its fan leaves. Add a little weak nutrient at this stage.
  • Till the time plant is in the process of rooting, you have to spray it with water. Once you have seen signs of plants being rooted, water them properly.
  • You should also drain the rooting solution out from the cube as it is of no use now.
  • Now, at this critical stage, you are supposed to check whether the plant is wilting. You can check it by opening the grow tent a little bit. If you find no wilting for 4 to 6 hours it means you are ready to move ahead.
  • Now you can put these clones under HID or LED lights or you can plant them outdoors in soil.
  • Make sure that they get 15 to 18 hours of lighting. They need this much light to get to the vegetation phase.

How To Avoid Wilting When Growing Clones

Don’t worry if you find your clones wilting, just check if they are placed properly in their respective mediums. Also keep a close eye on your lighting. It should not be too bright and should be in line with the light levels needed by the plant. New clones need relatively gentle light: 25/45/45 (red/blue/white percentage settings for a Kind LED grow light). If you follow the above criteria, you should get successful results. And over time and with experience you’ll be able to refine the process and learn even more.

Hydroponics

Hydroponics for growing marijuana results in the greatest yields. But it has both advantages and disadvantage, so let’s discuss them first before going into the core details of how you can grow your own Cannabis Sativa using hydroponics.

Advantages

  • There is no need for soil in this method so it is a clean process. All the process is done making no mess at all.
  • Due to the controlled system, pollution in the environment is eliminated.
  • It produces large amounts of high quality weed.
  • Due to the controlled and monitored system of hydroponics, there should be no dry spots or root drowning.
  • It reduces water costs because water remains in the system.
  • Nutrients are controlled under the system, so it save you money here as well.
  • It is easier to prevent the hydroponic system from getting infected or attacked by insects.
  • The time of growth is rapid and quantity of yield is greater.
  • With the right hydroponic system you can even grow your own weed in your bedroom.

Drawbacks

  • This is an expensive mean of growing marijuana.
  • You need to regularly monitor on the system.
  • It totally depends on electricity.
  • A little mistake can destroy the whole thing that took you ages to prepare.

Step By Step Guide to Growing Marijuana Hydroponically

Now let’s show you how to grow marijuana in your hydroponics system. Make sure to follow each step correctly and in the right order.

Initial preparations

  • First of all collect all the basic necessary items that you need. The items may include seeds or clones (whatever you prefer); some white paint; hydroponic nutrients; containers or pots; growing medium for the pots (such as Coco Coir); fluorescent, HID or LED lighting system; timer; pH detector.
  • Now you’ll need to prepare your walls in order to maximize your weed production. Growing indoors, means it’s up to you to provide your crop with an appropriate amount of light. Painting the walls of your grow room with semi-gloss white paint helps reflect the light source back onto the plants.
  • You can also use mylar to line your walls, or grow within a mylar-lined grow tent or grow box, as mylar is highly reflective. The drawback is that mylar reflects both light and heat extremely efficiently, so you need to be careful not to burn your plants.

Lighting

  • Next you have to set up the lights. Hang them to give your plants the maximum amount of coverage. Your light should come with instructions giving suggested heights for each stage of growth to ensure each plant in your grow space gets enough light. Also check any instructions that came with your plant or seeds, as some strais need more light than others.
  • If you’re using HID (High Intensity Discharge) grow lights, the general rule of thumb is 40w per square foot, going up to 60-70w to maximize yields.
  • If you’re using LED grow lights, to ensure good coverage, check your light’s PAR value. PAR (Photosynthetically Active Radiation) is the section of the light spectrum that the plant can actually absorb and use to photosynthesise. This is the range from 400nm to 700nm. A full cycle LED light will produce the PAR values you need at every stage of your grow—and won’t waste your electricity bill producing light your plants can’t use.
    • PPFD, Photosynthetic Photon Flux Density, is the main measure of how much of that usable light is falling on the plant per square meter per second. It’s basically the intensity of the light. This is often what people mean when talking about PAR rating or values. For good light coverage, the higher the better.
    • When buying an LED grow lights, as well as looking out for high PAR values, you also need to check out the spectrum it produces. This is basically the quality of that light. The ideal is a full spectrum grow light.
    • The simplest rule of thumb for making sure your plants are adequately covered by an LED grow light is to assume a minimum of 32w per square foot. However, note that this refers to how many watts the light draws at the wall socket, not its stated output.

    [N.B. We could go a lot more in-depth on ensuring even light distribution, PAR and the various measures and ratings involved with grow lights. It’s a large and sometimes controversial topic in the growing community. However, for this beginner’s guide we decided to stick with the simplest rules of thumb, to get you growing more quickly. And as we mentioned above, the instructions that came with your light and seeds/plant should see you right. However, if you want to learn more, check out this article or our guide to choosing a grow light.]

    Temperature, humidity, ventilation, nutrients

    • Careful not to overheat plants with the lighting. The maximum temperature a marijuana plant can bear is about 90 degrees Fahrenheit. Check this guide for how to measure and control temperature and humidity in your grow setup.
    • Every plant needs proper ventilation. This is one of the most important requirements for an ideal growing environment. So make sure that your growing area is properly ventilated.
    • If you are not using the cloning method, then you’ll obviously need seeds. Seeds need to germinate before planting. (We’ve covered how to pick seeds and germinate them above.)
    • The next destination for a germinated seed is a rockwool block. This is where the initial growth of the plant will take place.
    • Now you can start feeding your plant with water and other nutrients in your hydroponic system. The ideal water pH level at this stage is 5.0 to 6.0. Do not overfeed the plant with some extraordinary amount of nutrients—too many nutes can spoil a plant very quickly. Start off with an average amount of nutrients and increase gradually.
    • At this stage, a plant needs intense care and careful monitoring to ensure maximum yield in the future. Keep an eye on the pH level of the tap or filtered water you are growing with. Also keep a careful eye on nutrients and lighting. As plants grow they obviously get closer to the light, so be careful they’re not getting too much.

    Vegetation and flowering

    • After seeding, the next important phases in a plant’s life are vegetation and flowering. You need to make sure that the environmental conditions are perfect for these stages to maximize your yield and yield quality.
    • You can use height to determine the growth time for your plants in the vegetative phase. The plant may double its height during the phase of flowering. Ideally the plant should be left in a vegetative stage till its height is 6 to 18’’.
    • Once your plant has grown up to 18’’, it’s time to start the flowering process. Balance of lighting has a vital role at the flowering phase. Adjust the light schedule to provide 12 hours of light a day.
    • As plants begin to flower, within the first couple of weeks you’ll be able to judge the sex of the plant.
      • Female plants will start growing white hairs around the nodes/branches, these will turn into white wispy almost shoot-like ‘pistils’.
      • Whereas in male plants, after a week or two, small grape-like balls will become visible, which will grow into bunches (pollen sacs). These bunches may also resemble bananas, in shape and color. (So, yes, balls and a phallic shape. If that helps you remember.)
      • Check, too, for hermaphrodite plants. Sometimes a plant will develop female pre-flowers on one part and male on another. So continue to keep an eye on plants that you thought were female, and don’t just judge on one preflower.
      • Remove all the male plants now as they will pollinate females. Also remove hermaphrodite plants that will self-pollinate and may pollinate other plants too.
      • Continue to keep an eye on flowers as a stressed female plant can begin to grow elongated yellow pollen sacs from the center of the bud. These ‘bananas’ produce pollen as soon as they emerge. Remove or separate them immediately, and if you see too many ‘nanners’, begin harvesting and cut your losses.
      • Now comes the most patience demanding phase, as you wait for a plant to reach maturity. How long this takes totally depends on your system and the type of strain you’re growing. As a general estimate, it takes about 6 to 12 weeks for Cannabis Sativa to mature.

      Harvesting

      • One week before harvesting, only feed the plant with water. If you use other nutrients at this time, they can affect the taste when smoking your weed.
      • Harvest when resin on the buds is clear and sticky, some of it beginning to darken to brown or amber.
      • For greater control over flavor and effects:
        • When you see 50 to 75% of pistils have turned red/brown, you’ll get a lighter flavor and mellower high.
        • When 70 to 90% are brown you’ll get heavier stronger weed.
        • 90 to 100% and it’s very nearly too late, the taste will be heavy and the effects more narcotic.

        How Important Is Light for Marijuana Growing?

        Marijuana requires a lot of light. This is the key factor in producing greater yields. The crop will not be sustainable if an appropriate amount and type of lighting is not provided. Whether you are growing cannabis in soil medium or in a hydroponic system, correct lighting is probably the most needed nutrient for healthy plant growth.

        Lighting Systems

        When it comes to lighting systems for indoor growing, there’s an almost overwhelming amount of choice available these days. And of course each option has its respective advantages and disadvantages—which we’ll cover shortly. Lighting systems can include bulbs, reflectors, ballast, timers, different color spectrums and various other features. But whatever the system, the intention is to activate rapid growth in your cannabis plants and maximize your yield.

        Important Information About the Role of Light

        What you need to determine before choosing the lighting system is the color and temperature of light. Different colors have different impacts. Look at CCT/Kelvin rating to determine color of HID fluorescent lights and CRI rating to gauge the intensity of the color. The higher the CRI the more natural and vibrant the stated colors will appear. For Kelvins, 2700K will be a warm red, 4200K a cooler blue color, 6500K is closest to sunlight; the lowest Kelvin rating is white, the higher the number the bluer the color. You will find varying advice on wattage of lights, with the maximum used by most growers being 1000W for the cultivation of Cannabis Sativa. More than 1000W will usually be harmful, but setups with lower wattages can work well. (However, when it comes to LED grow lights, you’ll find some much higher wattage LED models on the market. Because one of the great advantages of LEDs is that they run so much cooler than other grow lights.) A simple way to gauge light emitted per square foot by a non-LED bulb or any other non-LED light source: look at a light or bulb’s lumens rating. A marijuana crop needs luminosity of at least 3000 lumens per square foot. Although, for maximum productivity, you should provide 7000 to 10,000 lumens per square foot. A broader color spectrum lamp will tend to outperform a grow lamp with a higher lumen output. They need bright light, but it’s the blue and red parts in particular of the visible light spectrum that plants actually absorb and use to photosynthesize. Having said all that, though. we want to reiterate the importance of PAR values.

        Lumens really only measure the intensity of the light to the human eye. For plants, which can only use wavelengths within the 400-700nm range of the light spectrum, it’s PAR that really matters, and the spectrum of light produced. Various kinds of bulbs can produce a broad spectrum of usable light for growing cannabis. Or you can have different lights for different stages of the growing cycle. But a good LED grow light is the simplest option. It will give you every kind of light the plant needs (and none that it can’t use), more efficiently, cheaply and with more user-friendly controls. However, a lot of available growing advice (especially for non-LED grow lights) still discusses lumens. Hence the discussion above.

        Sources of Light

        Growing a crop indoors you’ll obviously need some artificial light source—and you simply cannot afford to ignore good lighting if you are a serious grower and want results. Fluorescent and especially LED grow lights are great for the growth of marijuana plants. Compact fluorescent lights are also available on the market, commonly abbreviated to CFL. The best thing about CFLs is that they are available almost everywhere. HID lights may not be available in some places, but CFL is available pretty much anywhere in the world. Early LED lighting systems were not ideal, but the technology and costs improved rapidly and LED lights are now highly regarded for indoor growing of plants. As we said above, they’re by far the simplest option and increasingly the best option too—especially for a beginner. There are numerous benefits to using LED grow lights, but the one most worth mentioning here is that they produce full spectrum light with a low level of heat.

        Placement of Light

        The ideal distance of light from your plants totally depends on the type of source you’re using. If you are using heat emitting grow lights then you’ll need to place this type of light a bit higher above the plant. Check the light’s instructions. However, if you’re using something cooler like LED grow lights, hang them about 10 to 14 inches from the plant.

        Lighting Schedules for Different Stages of Marijuana Plant Growth

        • In the seedling phase, Marijuana needs 16 to 18 hours of proper lighting.
        • In the vegetative stage, the requirement increases to 18 to 24 hours daily.
        • In the flowering phase, give the plants 12 hours of light and increase the red part of the spectrum.

        Remember that lighting plays the main role in nourishment of your marijuana crop. If lighting is not good enough, your harvest won’t be either.

        Harvesting of marijuana

        Let’s get one thing out of the way, harvesting marijuana doesn’t demand some sort of rocket science. Harvesting is actually a fun thing. It’s the reward for all the hard work you’ve put into all the growing phases of your crop. Here’s what you need to know to get it right…

        When Should I Harvest My Marijuana Crop?

        Let’s cut straight to the chase. The right time to harvest the marijuana is easy. In fact, we’ve already covered it above. Just look at the color of the pistils or hairs covering the buds. At the beginning of flowering they’re white, but when they’re ready for harvesting they start to turn dark brown. When around 70% have turned brown is a good time to get your harvesting tools ready. After that, it all depends how you like your weed to taste and the effects you’re after. The browner, the stronger heavier and more narcotic.

        How Do I Harvest My Marijuana Flowers?

        On the day you decide to harvest your marijuana, it’s a good idea to start off early in the morning. Harvesting isn’t difficult but can certainly be time-consuming work—especially if there’s plenty to harvest. You should start by cutting the plant wholly from its root. Cut all of the plants that you nourished in your grow area. To make things easier, begin by cutting the larger, heavier plants first. After cutting them, remove some of the larger fan leaves. Then hang some wire horizontally from the ceiling and hang the cut plants from it, upside down, keeping some space between plants for good air circulation. Once you’re done with that, it’s time to dry your plants. The cheap, economical and most reliable way to dry the plants is to leave them in open air. However, drying cabinets and automated curing machines are also available on the markets these days and can be very helpful in drying your cannabis quickly and efficiently. The latter are more for commercial growers though. Some people also use oscillating fans to improve ventilation when drying. The fans should be circulating air around the plants, not blowing directly on them. If your plants are moving, your fans are not positioned correctly.

        What Time of Day Should I Harvest My Weed?

        Time of day is important in the harvesting of cannabis. Ideally, harvest in the dark. Because at night, the female plants store the food which they prepared during the daylight by photosynthesis. However, that’s for outdoor growing. For indoor growing, night time is dependent on your plant’s lighting schedule. If lighting was scheduled during night hours, for instance, then harvest the product in the morning. Since it can be time-consuming work, check how many plants you have, estimate how long it’s going to take to cut them all, and make sure you’ve set aside enough free time to get it all done.

        How Do I Prepare my Weed for Smoking?

        The first thing to note is that plants don’t die when you cut them, they die when their water is dried out. So, before doing anything else to your harvest, you need to leave the plants for at least 7 days in an environment of around 70 degrees Fahrenheit and 50 percent humidity to dry the remaining water from the plant. Keep the room dark too. And check periodically that no mold or mildew is developing. Remove any affected parts immediately. A fan to increase air circulation will help to prevent this.

        A quick note of caution:

        During the first few days of drying, the plants will give off a strong, unmistakable scent of marijuana! But don’t be tempted to hurry things along. Drying is not a process to rush—it can take up to two weeks. Sometimes a few days longer. However, drying slowly ensures heavy, flavorful, aromatic buds. After drying, the final step to producing tasty, smokeable weed is curing proper (technically, the whole drying process from the moment the plants are cut is curing). When the twigs inside your buds become brittle and the outside of the bud feels dry to the touch, you’re ready to begin. The buds should just snap off, with no stringiness left behind. Ideally, larger stems should still bend. Some growers, however, like to trim the buds before curing. If you do so, use clean sharp scissors to trim away any remaining leaves. (But save them for making edibles, as they will still contain trichomes.) And if you have more than a couple of plants, a good bud trimming machine can save you a lot of time and hard work.

        What is Curing and Why is it Necessary?

        • Breaks down chlorophyll to improve taste and smoothness of buds.
        • Brings out the unique flavor mix and aroma of your chosen cannabis strain.
        • During curing and drying turns all the THC in fresh marijuana into psychoactive elements that make you high when smoking it.
        • Reduces “harshness”, so that you’re less likely to cough or get a headache.
        • Properly cured buds are less likely to cause negative side-effects such as anxiety and paranoia.
        • Lessens the risk of mold or bacteria growing on your buds.
        • Increases potency, according to many.

        As a first-time grower you might be eager to try the fruits of your labor ASAP. But as you can see, it’s worth waiting—good curing accounts for almost 50% of the quality of your final product!

        How Do I Cure My Marijuana?

        Simply put the dried buds in mason jars (ideally 1 quart jars, which will hold about an ounce), about 75% full. Any that don’t feel dry to the touch, keep drying them. If buds already in a jar start to stick together when you shake the jar, they may still be too moist. Just leave the lid off for a while until they feel dry to the touch again.If you choose to invest in a hygrometer to test humidity in the jars, you’re aiming to keep your buds at a relative humidity of around 60-65%. Also, keep your jars in a cool dark environment. For the first 1-2 weeks remove lids and check your buds every 24 hours—they need air. If you smell ammonia or feel moistness, leave the jar open to air for 2-4 hours. If buds feel wet, remove them entirely for 12-24 hours. Don’t worry too much about over-drying. It’s best avoided, but even over-drying improves the cannabis. After a couple of weeks, when you’re sure that the buds are curing nicely, you can start to remove the lid just once a week. If all remains well for several weeks, once a month will do. Buds will continue to cure for up to 6 months. For long term storage, keep in an airtight container (such as the mason jar). Buds should have been curing for at least 3 months first. After 6 months, consider vacuum sealing them, or freezing the buds in tightly packed mason jars.

        How long before you can smoke it?

        Up to you. You can try a little at any stage in the curing or storage process and see what ‘vintage’ suits you best. That’s it—you’re done! You’ve got your first smokeable crop of marijuana.

        Afterword

        In writing this step by step guide to growing weed indoors we wanted to help out newbie growers, many of whom can get confused by or bogged down in lengthy and overly-technical books. That’s not to say the information in those books is wrong, by any means—in fact, we gathered plenty of information for this article from those books. The problem we found with those books was that they just weren’t aimed at the newbie. Too much jargon. Too easy to get lost in advanced techniques you don’t need to know until you’ve tried growing a few times. We decided there needed to be an accessible guide for the beginner which focused purely on all the most useful starter information about marijuana and marijuana growing methods and gathered it all together in a concise, convenient manner. This guide will get you started. The rest you can learn along the way as you step up your growing, encounter new problems and solutions and hone your techniques. We hope that you’ll benefit from our efforts and that you enjoyed this beginner’s guide to growing marijuana indoors. We look forward to hearing from you through your feedback. And we wish you the best of luck in your budding weed growing career. Happy growing!

        Next Level Weed Growing

        Made it through our beginner’s guide and starting to get the hang of this whole weed growing thing? Looking to step up your marijuana growing game to pro level? You couldn’t do much better than to invest $57.00 in a copy of Ryan Riley’s 839-page Growing Elite Marijuana: The Complete Guide—revised and updated for 2017.

        We know, 57 bucks looks pricey at first glance. But when you’re really getting serious about growing, a comprehensive grower’s bible like this could swiftly pay for itself many times over in better quality weed, higher yields, and fewer costly mistakes—and save you a lot of time-consuming trial and error into the bargain. Moreover, it’s not just one monster book you’ll get—it comes with a whole package of invaluable guides, including an audio version. If you think you might want to buy this book, go the page and skip almost all the way down to the bottom to avoid the incredibly long sales pitch. You will find the order form and the details for everything else at the bottom of the page. In short, this is all the most up-to-date professional knowledge you could ever need to take your marijuana growing to the next level—and have you literally living the life of Riley! (Sorry. We couldn’t resist.)

        How useful was this post?

        Click on a star to rate it!

        Average rating 3 / 5. Vote count: 1

        No votes so far! Be the first to rate this post.