Categories
BLOG

how to vape cbd crystals

How To Dose And Use Cbd Crystals For Maximum Effect

Most of us know of the cannabinoid CBD by now because it gets a lot of attention in the nutraceutical and medical industries. But what about CBD crystals? That’s something fairly new on the market, so we are going to show you what they are, as well as how to properly dose and use them.

What Are Cbd Crystals?

CBD crystals are the cleanest and purest form of CBD available today. They reach a purity level of 98% with marginal traces of other cannabinoids and terpenes in the mix. This product and its purity are achieved via different extraction methods, one being the supercritical CO₂ process. Plant material gets filtered out to remove all the unwanted components like excess waxes. The resulting end product is a CBD isolate that has a powdery crystal form (hence the name) and looks like fine sugar.

The advantage of CBD crystals is that they can be dissolved in food and drinks, applied sublingually or as a topical salve like many regular CBD products, or they can be vaporized or dabbed. This opens up a whole new world of CBD consumption options (more on that later). Moreover, crystals lack the strong and bitter taste that most consumers find unpalatable about other CBD products. Of course, CBD crystals also contain 0% THC, which means they are non-psychoactive.

How To Dose Cbd Crystals Correctly

First of all, you don’t have to worry about taking in too much CBD. It is non-toxic, so you can’t overdose. However, you could definitely be more chilled out than expected with a higher dosage, which would be a waste of crystals/money. Like with everything else, you should always start slow and work your way up to the desired effect.

Although the dosage depends on multiple factors like your weight, health, and metabolism, experts recommend starting with 5–25mg a day. The average starting dose is 10mg. Always check the label of your CBD product as well because it should feature the amount of CBD in the product and a suggested serving size.

With CBD crystals, a precise scale is an absolute must. You will have to weigh the crystals to get a correct dosage. If the recommended average daily dose is 10mg and most CBD products tell you to use it 3–4 times a day, that would mean to vape, dab, or ingest an amount of 2.5–3.3mg of CBD crystals per dose.

The next step is to listen to your body and become aware of any positive or negative effects. You should wait 3–4 hours after your first dose because it can sometimes take a while for the effects to become fully noticeable. In the event you don’t feel any effect at all after a few hours, take a slightly larger amount. Once you’ve reached the point where you start to notice an effect, you should remain at this dosage for about a week.

You’ll want to monitor your body closely during this week. How is your overall health, your mental state, and energy level? With this knowledge, you can now increase or decrease the dosage to get to your desired effect. Just don’t rush the process! Start small and only make minor adjustments. No big rises! This way, you don’t waste money by ingesting too much, but don’t get a weak effect either.

Different Methods Of Consumption

Let’s explore the pros and cons of a variety of common consumption methods of CBD crystals.

Dabbing

This is by far the most popular way to use CBD crystals. You basically melt the concentrate and inhale the cloud of vapour. The only real downside to this method is that you will need some accessories if you’ve never dabbed before. These include a dab rig, a torch lighter, a dabbing tool, and of course, your CBD extract. If you have assembled all the necessary tools, put the crystals on the dab tool, heat the nail with your blow torch till it’s red hot, wait 30–60 seconds for it to cool down a little bit, put the crystals on the nail to melt them, and inhale. You will feel the effects almost immediately, which is a benefit over other methods. This is also the most efficient way of consuming CBD crystals, and has the best taste to it.

Dissolve Under Tongue (Sublingual Method)

The most easy way of ingesting CBD crystals is to dissolve them under your tongue. Hold them there for 60–90 seconds. This way, the crystals get directly into your bloodstream, causing you to feel the effects almost immediately.

Vaping

Vaping is pretty similar to dabbing in that it has a quick onset of effects and a better overall taste. You will need not as much paraphernalia as with dabbing, but will require a quality vaporizer that was developed for use with concentrates (vapes for flower won’t do the job). Put your extract in there, heat it to the desired temperature, and draw. It’s that simple! But don’t heat it too high, as that will introduce carcinogens and benzenes into the mix, which we try to avoid as much as possible. This is also true for dabbing CBD crystals.

Mix With Vape Liquid

You can mix CBD crystals with your favourite vape liquid as well. Add your desired amount of crystals to the vape liquid and shake it to dissolve the CBD. Please note that there are health risks associated with the consumption of e-liquids, so this may not be the most ideal option for you to use CBD crystals.

Make Edibles

Just like you would with cannabis, you can infuse CBD crystals into coconut oil or butter to make edibles. Simply melt the butter or oil on the lowest temperature and add your crystals. Stir for 5 minutes until their are fully dissolved. After that, the mixture is ready to be paired with the other ingredients in your recipe. The taste will not be so overpoweringly “weedy” like it can be with cannabis sometimes. But like with all edibles, it can take a long time for the effect to kick in, ranging between 1–2 hours.

Mix With Carrier Oil

You can either use hemp, olive, or coconut oil for best results. Basically, you are making your own CBD oil, but a much more potent one. You will have to heat the oil together with the crystals in a hot water bath for about 10 minutes for them to fully blend together. For the dosage: 1,000mg of CBD crystals in 10ml oil gives you a concentration of 10% CBD. It’s also the most economical way of using CBD crystals.

If you want to consume pure CBD, you definitely should consider CBD crystals. Never heard of them? No worries, Zamnesia shows you the what, why, and how.

How to Make Your Own CBD E-Liquid with CBD Crystals

Table of Contents

What are CBD Crystals?

CBD crystals are simply a form in which CBD can be presented. It gets its name from its resemblance to actual crystals, yet the consistency itself is nothing like crystals, and you needn’t worry about them being hard.

There are 3 different types or forms of CBD crystals, and these are CBD Crystal Isolates, CBD Crumble, and CBD Shatter. These are all different due to the method of extraction, and the different types of solvents used to get the CBD from the hemp or cannabis plants.

CBD crystal isolates are white and powdery in consistency, and these are usually around 98 – 99% pure CBD, with the exception of traceable amounts of other components in the cannabis or hemp plants.

CBD shatter is thin and has an appearance like that of glass, for it usually comes in sharp pieces, and will shatter when dropped or hit. CBD wax shatter is usually not clear in colour, for it is not a pure isolate, but it is very clean and is preferred for many different types of DIY CBD products thanks to its malleability.

CBD wax crumble is waxy and smooth in appearance, and as its name suggests, looks like large crumbs or crumbles off a larger piece. This type of CBD crystal gets its appearance from both the way it is extracted and the components it has within it. Normally, wax crumble is more of a full spectrum CBD, meaning that it has many of the natural oils and terpenes which the cannabis or hemp plant produces.

How to Make Your Own E-Liquid with CBD Crystals?

E-liquids are actually very simple and easy to make. Especially when you want to make one just to your liking, or to cover certain preferences or needs of yours.

The best way to start out is by purchasing high-quality food grade Propylene Glycol (PG), and Vegetable Glycerin (VG), both are found easily on Amazon. Then, you need to purchase high-quality CBD Crystals of your choice. Make sure you are getting CBD Crystals that are an Isolate to get the most out of your products and to be able to make a more seamless and smooth e-liquid.

After you purchase your 3 main ingredients, you will also need an airtight container or bottle in which you can mix your e-liquid and store in. This needs to be airtight because you will be warming your mixture up in a pot of warm water, and you don’t want any water whatsoever getting into the mix. Make sure it is heat-safe and airtight.

If you want to make a flavoured E-liquid you will need to purchase a high-quality E-liquid Flavour Concentrate in the flavour of your choice. You can get these on Amazon or from any Vape Shop.

Now, to begin making your own CBD e-liquid you must first know that the most E-liquids have a PG to VG ratio between a 60:40 and 70:30. Meaning it is made up of 60% PG (Propylene Glycol) and 40% VG (Vegetable Glycerin).

Love Hemp suggests 200mg of crystals to 10ml of E-liquid for best results, so based on their professional opinion we suggest the same. This would make an E-liquid with a strength of about 2%.

Right below here you will see the step by step method we find the best:

  1. Measure out 6ml PG and 4ml VG and pour the mixture into your airtight container (This is to make 10ml of E-liquid).
  2. Measure out 200mg of CBD Crystals (this is best done with a scale) and mix into the airtight container.
  3. Pour about 3 – 5 inches of water into a pot and set on medium-high heat. This water should reach approximately 60 degrees Celsius. This is basically very hot, but not boiling. Be sure to not go too far over this temperature.
  4. Once the water is the correct temperature, put your sealed contained of e-liquid into the water, and set your timer for 10 minutes. Note: this is just so that all the ingredients in your e-liquid can fully melt and merge into one another.
  5. After the 10 minutes is up, you can take out your e-liquid, let it cool, and even mix in a few drops of flavouring if you choose to do so. You can also add it in before the mixture goes into the hot water, for it does not change much in terms of the outcome.

Now you know all about how to make your own CBD infused e-liquid. We hope you like the way yours turns out. Making vape juice really is a simple task, and only takes around 15 minutes or so. Many people are starting to make their own because they like the control they have. This is a great way to make a non-addictive E-liquid free of nicotine.

Let us know if you’ve made E-liquids before and how they’ve turned out!

The Ultimate Guide to making your own CBD E-liquid! Discover how to turn your CBD crystals into CBD vape juice and save you money!