Weed And Seed Directions

Even if you are a beginner or expert gardener, one aspect that you will want to achieve is to have a magnificent weed-free lawn. Every bag of seed in your local store has what’s known as a seed tag or seed-analysis tag attached. What should I do first, put down seed or kill my weeds? This is the question I get more than any other this time of year. Here is the way I try to layout the options: Do you have less than 75% good grass with bare spots larger than a few inches in diameter? Answer: If…

How Long Does Scotts Weed and Feed Take to Work?

Even if you are a beginner or expert gardener, one aspect that you will want to achieve is to have a magnificent weed-free lawn.

However, you might realize that you need to get high-quality lawn fertilizer to get such a lawn.

That is where the Scott Weed and Feed play a role in feeding your lawn and handling all weeds.

By reading this guide, you can know how long the Scotts weed and feed takes to work.

Table of Contents

How long does Scott’s Weed and Feed take to work?

If you choose the appropriate product based on your week and grass type, it can take between four days to one month to notice full results, especially if you apply it in the growing season.

However, the fertilizer components will start to start between one to five days.

When to apply the Scott Weed and Feed?

Scott has two week and feed products, including the Scotts Super Bonus S Weed and Feed and Scotts Lawn Pro Super Turf Builder.

You can only use the Scotts Plus 2 twice during the growing season, especially when the dandelions and other weeds grow.

However, you can apply for the Super Bonus at any time when the weeds are growing.

Ensure you read the instructions on the packaging label because the products can be detrimental to certain types of grass, and you should not use them often.

Timing is important when it comes to eliminating weeds.

In particular, you can have the appropriate tools and product, but if you apply the Scott weed and feed at the wrong time, it might not have any effect or can result in a limited effect.

For instance, the weekly killer cannot be effective, especially during extremely hot or excessive cold conditions.

The labels on the product indicate that it can be more effective when you apply the weed and feed in late fall, early fall, late, and early spring.

Further, if you want to achieve the desired result, you need to follow these tips when spraying the Scott weed and feeding it in your garden or lawn.

  • Ensure you spray the weekly killer when the temperatures range between 60°and 85° Fahrenheit to optimal effectiveness.
  • Do not apply the weed and feed on days with excessive winds because wind can make the weed killer dry quickly, hindering it from being absorbed.
  • Mowing is discouraged for appropriately 48 hours after application. In other words, you need to wait between 2 to 4 days after applying the product to protect your grass.
  • Do not apply the product if it has been predicted to rain within the next 24 hours. In particular, rain can wash away the active ingredients in the products before they are completely infiltrated into the plant system.
  • Ensure your lawn has a normal height of an appropriate 3 to 5 inches.
  • Do not try to water your grass, lawn, or garden for around 24 hours after the application.
  • Ensure you apply the product early in the morning for easy absorption when photosynthesis occurs during the day.

How do you know that the Scotts Weed and Feed is working?

After applying your weed and feed, the following signs can help you know that it is working as intended.

  • Your grass is supposed to appear to grow faster and thicker between the first day of the application and after around six days.
  • After one week, the weeds are supposed to start wilting and yellowing
  • After two weeks, most weeds in your garden or lawn are expected to have turned brown, died, or you can easily remove them using your hand.
  • After one month, most weeds will have died, and your grass will become more lush and green.
See also  Weed Seeds Legal Kentucky

Where you should use the Scotts Weed and Feed

The Scott weed and feed is appropriate to almost all kinds of lawn grass species.

The product is not appropriate for plants that produce food or ornamental plants, including vines, fruit trees, and vegetable plants.

Also, the labels claim that the fertilizer cannot burn your grass, provided you apply it according to the instructions.

If your grass is dry, you can water the lawn one day before applying the weed and feed it to prevent it from burning grass.

How does the Scotts Weed and Feed work?

As the name indicates, the Scott Weed and Feed comprises two major ingredients, including fertilizer and weed killer.

The granules of weed killers will be absorbed after they have settled on weed leaves but slide from the grass blades.

In particular, the weed and feed product work by inflicting root damage resulting from weeding dying or preventing the production of protein by limiting photosynthesis.

At the same time, the fertilizer element of the product increases healthy grass blade growth, resulting in a more dense lawn.

Therefore, your grass will be left nourished by fertilizer when the weed killer eliminates the weeds.

What the Scotts Weed and Feed kills

The weeds and feed work best on broadleaf weeds, including spurge, henbit, plantains, knotweed, chickweed, and dandelion.

However, you might be required to use another product to eliminate crabgrass and weeds that have narrow leaves, making it challenging for the weed and feed granules to settle.

How often should you apply it?

You should not apply the Scotts Weed and Feed product more than twice per year.

For instance, if you applied the product in spring but did produce the desired results, it could be safe to undertake another application in the fall season.

Most importantly, ensure your applications are at least two months apart to prevent the build-up of chemicals to detrimental levels because they can kill your yard vegetation.

Although you can apply the Scott feed and weed at any time because it is a pure fertilizer without added pesticide, weed killers, and other chemicals, it is best to follow the instructions indicated on the label.

The Scotts weed and feed is designed to feel different kinds of lawns to boost the healthy growth of grass and quick greening.

Thick and healthy grass might need limited additional watering to kill several weed species.

By reading this guide, you can know how long the product takes to see the results.

How to Read a Grass Seed Label

Choosing the best grass seed for your lawn projects can seem overwhelming when you’re faced with so many choices in local stores. Differences in packaging, products and applications can complicate even the simplest comparisons. The bag itself provides important information about the product, the technology behind it and the types of projects it suits best, such as patching and repairing or seeding new lawns. But labels aren’t the only way to determine the best investment for your time and money. Products also carry seed tags to tell you more about what’s inside the package.

What Is a Seed Tag?

Every bag of seed in your local store has what’s known as a seed tag or seed-analysis tag attached. Thanks to the Federal Seed Act 1 and state seed laws, every seed product must carry standard, uniform information to prevent misrepresentation and help consumers make informed choices.

On bags weighing 15 pounds or less, seed tags are usually printed on the back of the bag, at the bottom. On larger bags, tags are sewed into the bag’s top seam. On jugs of seed, you’ll find the seed tag printed on the side panel. Understanding a seed tag isn’t very complicated once you learn what it provides.

What a Seed Tag Tells About Grass Seed

Information on every seed tag is based on actual testing of the seed product. Every item of information equips you to choose the cleanest, purest, highest quality seed for your needs. Formats vary, but every seed tag provides the following:

See also  How Long Does A Weed Seed Take To Start Growing

1. Seed Product Name: This is the brand name, and it’s usually the first item on the tag. On Pennington products, you’ll find names such as One Step Complete for Sun & Shade Areas or Pennington The Rebels Tall Fescue Blend Keep in mind that mixes contain more than one grass species, and blends contain different varieties of the same grass.

2. Net Weight of Bag/Container

3. Pure Seed: Purity indicates the percentage by weight of each grass variety and kind named. The percentages reflect the quantity of pure grass seed versus other contents in the bag.

Seed tags may list several lines under the Pure Seed heading. Varieties with the highest percentage are listed first. The total of all the percentages under this heading reveals what percentage of the bag’s contents are pure seed.

4. Variety and Kind: Each line of pure seed lists the variety and kind of seed next to its purity percentage. Kinds of grass are general species, such as Tall Fescue, but varieties are grasses that exhibit distinct characteristics in areas such as performance or appearance that distinguish them from other grasses of the same kind. Knowing variety names can help you match your lawn’s specific needs.

Kinds are similar to apples versus oranges, while varieties are akin to Granny Smith versus Red Delicious. For example, Mallard Kentucky Bluegrass listed as the variety and kind lets you know you’re getting more than standard bluegrass. The Mallard variety identifies an award-winning, drought-tolerant grass developed through Pennington-affiliated research and breeding programs.

VNS on a seed tag stands for “Variety Not Stated,” which typically refers to lower cost, lower quality seed. Premium grass seed generally relies on exceptional named varieties, but VNS seed can contribute to quality seed products.

5. Germination Rate: For each pure seed variety and kind, the germination rate reflects the percentage that germinated under laboratory conditions during testing on the seed lot. This is the percentage you can expect to germinate and produce normal, healthy seedlings under optimal conditions.

Pure seed percentages reflect quantities by weight, but germination rates indicate potential performance.

6. Origin: Seed tags list the state, U.S. possession or foreign country where each named pure seed was produced or propagated.

7. Other Crop Seed: Any seed that comprises 5% or less of the product by weight can go unnamed. Smaller seed amounts, other than pure seed and weed seed, are combined in this percentage.

8. Inert Matter: Seed products can contain non-seed materials as a natural occurrence of cleaning and processing seed. Inert matter reflects the percentage of these materials, such as sand, soil, stem pieces and seed parts. In all-in-one products, such as Pennington One Step Complete, this percentage also includes the product’s beneficial mulch and fertilizer. Tags on these products provide a breakdown of these inert ingredients.

9. Weed Seed: This item reflects the percentage by weight of seeds found during testing that your state considers weeds. This is seed other than pure seed and other crop seed. Weed designations vary from state to state.

NOTE: The percentage of all pure seed, other crop seed, inert matter and weed seed should always equal 100%.

10. Noxious Weeds: Noxious weeds are categorized by state and listed separately on the seed tag. Noxious weeds are regulated and may be restricted or prohibited from state to state. Seed tags note the name and the number of seeds found per pound during testing. This is different than the other items on the seed tag that are calculated by percentage of total package weight.

11. Guaranteed Analysis: Seed tags on all-in-one, fertilizer-inclusive products include a guaranteed analysis of the fertilizer and soil amending ingredients. To help consumers compare products easily, all fertilizer product labels carry three numbers denoting the fertilizer’s N-P-K ratio — the proportion of the nutrients nitrogen (N), phosphorus (P) and potassium (K). These numbers reflect each nutrient’s percentage by weight. Learn more about understanding fertilizer information from Pennington Fertilizer by reading Numbers to Grow By: Understanding Fertilizer Labels.

12. Lot Number: This permanent identification number traces the seed back to a specific batch that was processed and tested. Test results apply to all seeds that were part of that lot.

See also  White Widow Weed Seeds

13. Test Date: This date indicates when the seed lot was tested for germination. Seed germination rates drop over time, even under optimal storage conditions. However, lots can be retested and “over-stickered” with a new seed tag if the germination rate meets the label guarantee.

14. Sell By Date: Each state allows seed to be sold for a fixed number of months after the initial testing or retesting. Allowances vary, and some states require tags carry “sell by” dates. Seed tags include these dates alongside state-specific listings.

15. Name and Address of the Seed Company

Putting Seed Tag Information to Use

Seed tag information underscores the value of superior grass seed, but it also determines how much seed you actually need. Seeding recommendations are based on what’s called Pure Live Seed (PLS). A product’s PLS reflects pure seed percentages and germination rates. Planting rates on Pennington Seed packaging take PLS into account, so package directions show the amount of seed you need based on tested germination rates, but not all seed packaging does.

With a good understanding of seed tag information, you can see beyond the bag to the integrity of the seed inside. Seed tags on premium, purebred Pennington Smart Seed and the full line of Pennington’s grass seed products help you feel confident you’re getting the best value and the best quality seed for your project.

Sources:

1. U.S. Department of Agriculture Agricultural Marketing Service, Federal Seed Act, issued March 1940, amended August 1988, revised April 1998.

Pennington, Pennington 1 Step Complete and Smart Seed are registered trademarks of Pennington Seed, Inc.

Feed, Weed or Seed?

What should I do first, put down seed or kill my weeds? This is the question I get more than any other this time of year. Here is the way I try to layout the options:

Do you have less than 75% good grass with bare spots larger than a few inches in diameter?

Answer: If lots of larger spots, then seed this spring. Be sure to use a special Starter Lawn Food plus Weed Preventer that is compatible with grass seed (the regular crabgrass preventers will keep grass seed from growing). If you do not prevent weeds when you seed, you are likely to be very disappointed as crabgrass and other weeds will germinate and choke out your good grass before it has a chance to take hold. A machine called a slit-seeder will help make sure the grass seed comes in contact with the soil. You just select the Turf Builder Grass Seed blend that is right for your conditions, such as sun, shade, heat-tolerant, etc. If you only have a few bare spots to take care of, consider Scotts EZ Seed. I think this is the best bare spot repair product we have ever sold! Spread the Starter Lawn Food plus Weed Preventer after you put down the seed. Feed your lawn again in one month after seeding with Turf Builder Lawn Food. Once your new grass has been mowed 4 times, you can kill weeds with Ortho Weed B Gon MAX plus Crabgrass Killer OR Roundup For Lawns.

Do you have more than 75% good grass however your lawn is thin and weedy without widespread bare spots?

Answer: You may be surprised how your good grass will fill in with four feedings a year at 6 to 8 week intervals. Here is a schedule for the year: Feed your lawn now with Scotts Turf Builder with Halts Crabgrass Preventer. In 6 to 8 weeks after your first feeding, feed again with Scotts Turf Builder Weed and Feed if you have lots of weeds or if you only have a few weeds, your second feeding can be Turf Builder Lawn Food and spot treat your weeds with Ortho Weed B Gon MAX plus Crabgrass Killer. Put down Scotts GrubEx sometime in May or June. In 6 to 8 weeks after your second feeding, feed again with Scotts Turf Builder with SummerGuard to control insects. In 6 to 8 weeks after your third feeding, in late summer/early fall, feed with Turf Builder Lawn Food.

If you have questions during the year, the Scotts Help Center folks will be happy to help you.